MR ALADDIN : 18816899059@163.com
MR AU: auvuchi@163.com
0086-18816899059
0086-15018408881
PVC CLING
FILM EXTRUSION LINE
(Model: OG-FY1500)
(380V,3PHASE,50HZ)
I. Machine Character
FLY1600 casting method four axis collection PVC plastic film unit is our company unique design unit, combined China and abroad countries similar machine benefit, designed our own practical and advanced pvc film machine.
This unit from raw materials, after mixing, extension, stretching, winding then get products.
the entire process configuration using electrical instruments, starting clutch mechanism and mechanical devices, can realize separate operation and automatic sequence operation;
The drum of extruder adopts water cooling structure and PLC module temperature control. Vacuum suction and vacuum storage device; The cooling roller adopts the mirror roller with inter-layer spiral water cooling structure. Four-station automatic winding and changing device, and equipped with PLC controlled automatic edge cutting machine.
The unit has reasonable structure, beautiful appearance and convenient operation. Easy maintenance, advanced technology, low energy consumption, high efficiency, uniform product thickness, smooth coiling, cost-effective equipment.
PVC film is clear, transparent, clean film, food grade film, used for cold food packing, not for hot food packing. Widely used for packing cold food, can see a lot in shopping market.
NO. | DESCRITION | UNIT | Quantities | |
一、 | OG-FLY1500 PVC CLING FILM EXTRUSION MACHINE (SCREW DIA.115MM, THE DIE WIDTH 2200MM) | 1 | ||
1 | EXTRUSION SYSTEM | SET | 1 | |
1.1 | EXTRUSION PLATFORM+DIE SHELF | SET | 1 | |
1.2 | SINGLE SCREW EXTRUSION MACHINE | SET | 1 | |
1.3 | MAIN MOTOR | SET | 1 | |
1.4 | EXTRUSION GEAR BOX ZLYJ | SET | 1 | |
1.5 | DIE | SET | 1 | |
1.6 | PVC SPECIAL FILTER EXCHANGER SYSTEM | SET | 1 | |
1.7 | MOULD TEMPERATURE CONTROLLER | SET | 1 | |
1.8 | VACUUM AUTO-LOADING SYSTEM | SET | 1 | |
1.9 | MAIN MACHINE MOVING SYSTEM | SET | 1 | |
2 | HIGH TEMPERATURE AND LOW TEMPERATURE MIXING SYSTEM | SET | 1 | |
3 | WEIGHT AUTOMATIC SYSTEM | SET | 1 | |
4 | CASTING SYSTEM | SET | 1 | |
4.1 | MAIN COLD ROLLER | PC | 1 | |
4.2 | VICE COLD ROLLER | PC | 2 | |
4.3 | TRACTION ROLLER | PC | 2 | |
4.4 | STATIC ELIMINATOR | SET | 1 | |
4.5 | SMOKE PUMPING DEVICE | SET | 1 | |
4.6 | CASTING FORWARD AND BACKWARD DEVICE | SET | 1 | |
5 | TRACTION+CUTTING+TRIMMING SYSTEM | SET | 1 | |
5.1 | TRACTION DEVICE | SET | 1 | |
5.2 | CUTTING DEVICE | SET | 1 | |
5.3 | BLOWER SUCTION ON-LINE RECYLING MACHINE | SET | 1 | |
6 | WINDING SYSTEM | SET | 1 | |
6.1 | FULL AUTOMATIC 4 SHAFTS WINDING DEVICE | SET | 1 | |
6.2 | PRESSURE EXHAUSTING SYSTEM | SET | 1 | |
6.3 | AUTO-PAPER CORE LOADING AND UNLOADING SYSTEM | SET | 1 | |
6.4 | PAPER CORE SAVING DEVICE | SET | 1 | |
6.5 | STATIC ELIMINATOR | SET | 1 | |
7 | ELECRICAL CONTROOLING SYSTEM | SET | 1 | |
8 | AUTOMATIC CUTTING MACHINE | SET | 1 | |
Technical Parameters
FULL LINE TECHNICAL PARAMETERS:
l DIMENSION：~18000×6000×4800（L×W×H）；)
l MATERIAL： PVC
PRODUCT TYPE：FOOD GRADE CLING FILM
l PRODUCT THICKNESS：0.009～0. 012mm
l DIE WIDTH：（mm）1500；
l PRODUCT VALID WIDTH：（mm）1200；
l MECHANICAL SPEED：280m/min；
l PRODUCTION SPEED： 200-250m/min
l PRODUCT OUTPUT：（kg）250-300kg/h
l TOTAL POWER： AROUND 200 （kW）
l WEIGHT： 25000KG
I. MACHINE STRUCTURE
一、 | EXTRUSION SYSTEM | 2SETS |
二、 | HIGH TEMPERATURE AND LOW TEMPERATURE MATERIAL MIXING SYSTEM | 1SET |
三、 | WEIGHT AUTOMATIC CHECKING SYSTEM | 1SET |
四、 | CASTING SYSTEM | 1SET |
五、 | TRACTION+CUTTING+TRIMMING SYSTEM | 1SET |
六、 | WINDING SYSTEM | 1SET |
七、 | ELECTRICAL UNIT CONTROLLING SYSTEM | 1SET |
八、 | AUTOMATIC CUTTING SYSTEM | 1SET |
II. MACHINE TECHNICAL PARAMETERS
一、EXTRUDING SYSTEM | ||||
1.0 | SINGLE SCREW EXTRUSION MACHINE | |||
1.1 | QUANTITY | 1SET | ||
OUTPUT | 200-250 kg/h | |||
SCREW CONSTRUCTION | · ADOPT GRADUAL CHANGING, MIXING HEAD SINGLE SCREW | |||
MATERIAL | 38CrMoAlA，AFTER QUENCHING AND TEMPERING TREATMENT, GRINDING, POLISHING, NITRIDING TREATMENT, DEPTH: 0.4-0.7mm, THE SURFACE OF HARD CHROMIUM PLATING HARDNESS > 980HV | |||
1.3 | BARREL | |||
MATERIAL | 38CrMoAlA，AFTER QUENCHING AND TEMPERING TREATMENT, NITRIDING TREATMENT, GRINDING, POLISHING,THE SURFACE OF HARD CHROMIUM PLATING HARDNESS > 1000HV | |||
HEATING CONTROL UNIT | 6 ZONES | |||
HEATING AND TEMPERATURE CONTROLLER | TEMPEARUTE CONTROLLER, RELAY, USE BIG BRAND | |||
HEATING KW | AROUND 40KW, MEASURE THE TEMPEARTURE AND APPLY K TYPE THERMOCOUPLE, WIND COOLING. | |||
1.4 | MAIN MOTOR | |||
DRIVING MOTOR | 100KW | |||
SPEED ADJUSTMENT WAY | ||||
1.5 | GEAR BOX | |||
SUPPLIER | ||||
ADOPT HARD GEAR REDUCER, WITH HIGH TRANSMISSION PRECISION, LOW NOISE AND LONG USAGE LIFE | ||||
1.6 | PVC SPECIAL EXCHANGER | |||
MANUALLY CHANGE NET | 1SET | |||
1.7 | DIE | |||
SUPPLIER | ZHEJIANG | |||
DIE STRUCTURE | COAT HANGER TYPE FLOW CHANNEL, UPPER AND LOWER LIP ADJUSTABLE, STAINLESS STEEL ELECTRICAL HEATING ROD INTERNATIONAL HEATING. | |||
DIE MATERIAL | USE IMPORTED MATERIAL | |||
1.8 | MOULD TEMPERATURE CONTROLLER | |||
1.9 | VACUUM AUTO-LOADER | |||
QUANTITIES | 2SETS | |||
VACUUM PUMPS | 2SETS | |||
1.10 | MACHINE MACHINE MOVING DEVICE | |||
REDUCTION MOTOR | 1SET | |||
二、HIGH TEMPERATURE AND LOW TEMEPRATURE MIXING SYSTEM | ||||
2.0 | HIGH TEMPERUE MIXING | |||
REDUCTION MOTOR | 1SET | |||
2.1 | LOW TEMPERATURE MIXING | |||
REDUCTION MOTOR | 1SET | |||
2.2 | BLENDER | 1SET | ||
三、MATERIAL SEMI-WEIGHT SYSTEM | ||||
四、CASTING SYSTEM | ||||
3.1 | MAIN COLD ROLLER | |||
QUANTITY | 1PC | |||
MATERIAL |
INTERLAYER SPIRAL LINER, SURFACE MIRROR, SURFACE MIRROR HARD CHROME 0.06mm | |||
COOLING SWIVEL CONNECTOR | R2” SINGLE HEAD | |||
REDUCTION MOTOR | 1SET （INVERTER CONTROL） | |||
3.2 | VICE COOLING ROLLER | |||
QUANTITIES | 2PCS | |||
MATERIAL | INTERLAYER SPIRAL LINER, SURFACE MIRROR, SURFACE MIRROR HARD CHROME 0.06mm | |||
COOLING SWIVEL CONNECTING | R11/4” SINGLE HEAD | |||
REDUCTION MOTOR | 1SET （INVERTER CONTROLLER） | |||
3.3 | TRACTION ROLLER | |||
QUANTITIES | 2PCS | |||
REDUCTION MOTOR | 1SET（INVERTER CONTROLLER） | |||
3.4 | STATIC ELIMILATOR | |||
3.5 | OIL PUMPING SYSTEM | |||
BLOWER | 3SETS | |||
REDUCTION MOTOR | 3SETS | |||
3.6 | FORWARD AND BACKWARD | |||
REDUCTION MOTOR | 1SET | |||
五、TRACTION+ CUTTING+ TRIMMING SYTEM | ||||
5.1 | TRACTOIN | |||
TRACTION STEEL ROLLER | 2PCS | |||
PRESS FILM ROLLER | 2PCS | |||
TRACTION REDUCTION MOTOR | 1SET （INVERTER CONTROL） | |||
5.2 | CUTTING | |||
CUTTING BLADE | 7 GROUPS | |||
TRACTION ROLLER QUANTITIES | 1PC | |||
DRIVE REDUCTION MOTOR | 1SET （INVERTER CONTROLLING） | |||
CUTTING LENGTH | 2100mm | |||
CUTTING CYLINDER | 2PCS | |||
WINDING ROLLER | 1PC | |||
PRESSURE CYLINDER | 2PCS | |||
5.3 | BLOWER SUCTION MODEL ON-LINE RECYLING MACHINE | |||
CRUSHING DEVICE | 1SET | |||
BLOWER | CENTRIFUGAL FAN | |||
REDUCTION MOTOR | 1SET | |||
六、WINDING SYSTEM | ||||
5.0 | FULLAUTOMATIC 4 SHAFTS WINDING SYSTEM | |||
WINDING SHAFT CORE TYPE | 3 INCH SHAFT, 4PCS | |||
FORWARD AND BACKWARD CYLINGER | 2PCS | |||
LOCATION FIX CYLINGER | 2PCS | |||
AIR SHAFT COME AND OUT CYLINDER | 4PCS | |||
OVERTURN MOTOR | SERVO MOTOR 1SET | |||
WINDING MOTOR | SERVO MOTOR 4SETS | |||
CYLINGER HEAD CYLINDER | 4PCS | |||
BRAKE DEVICE | 1SET | |||
5.1 | PRESSURE EXHAUSING SYSTEM | |||
REDUCTION MOTOR | 1SET | |||
CYLINDER | 2SETS | |||
5.2 | PAPER CORE LOAD AND UN-LOAD SYSTEM | |||
5.3 | PAPER CORE SAVING DEVICE | |||
REDUCTION MOTOR | 2SETS | |||
七、ELECTRICAL CONTROLLING SYSTEM | ||||
7.0 | ELECTRICAL CONTROLLING CABINET | SOLID STATE RELAY, SIEMENS PARTS, 3 SETS | ||
CABINET | PLC，10”TOUCH SCREEN 2SETS | |||
八、TRIMMING （SEMI) | ||||
8.0 | REDUCTION MOTOR | 2SETS | ||
九、SPARE PARTS | ||||
1 | 1SET | TOOL FOR OPERATING THE DIE | ||
2 | 5PCS | BOLT FOR DIE HEAD | ||
3 | 4METERS | FILTER NET | ||
4 | 1SET | WRENCH A | ||
5 | 1SET | WRENCH B | ||
6 | 2PCS | SOLID RELAY | ||
7 | 5PCS | HEATING BAR | ||
8 | 5PCS | TEMPEARTURE CONTROLLER | ||
9 | 2PCS | HEATING RING | ||
10 | 1SET | COPPER BLADE | ||
11 | 1SET | TOOL BOX | ||
OUR FACTORY PHOTO:
OUR GROUP COMPANY :
COMPANY MORE THAN 20 YEARS.
LAND AREA MORE THAN 25000 SQUARE METERS.
HIGH TECH WORKERS MORE THAN 80 PERSON
CUSTOMERS MORE THAN IN 100 COUNTRIES
CE CERTIFICATION, UL CERTIFICATION, PATENT PROTECTION MODEL, FULL CONFIDENT FOR DESIGN, MAKING, SUPPORT TOP HIGH QUALITY OF PE STRETCH FILM MACHINE FOR ALL THE CUSTOMERS GLOBALLY.
-FOB any port of China.
- Delivery time: The Seller will hand over the goods to the buyer after 90-100 business days, excluding Saturdays, Sundays and public holidays (3-5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment
- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install
Set up :
- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.
Acceptance :
l Equipment that is considered valid must meet the following requirements:
l ü Specifications and functions of the machine match the content of this contract.
l ü Electrical, mechanical and control systems run smoothly.
l ü Run out sample products as required.
l ü Must have a certificate of quality of the place of production and documents attached to the machine.
ARTICLE 2: PAYMENT METHOD
v The buyer makes payment to the seller in 02 times by transfer to the seller's account.
v v First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.
v v 2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer (IF YES). The seller will send a notice of delivery to the buyer.
ARTICLE 3: WARRANTY
Warranty period: within 12 months from the acceptance date of the equipment.
During the warranty period, if the equipment is defective by the manufacturer of the Seller, the Seller is responsible for the presence at the purchaser factory within 48 hours of being notified to repair the equipment. All costs incurred will be borne by the Seller.
(If the device is faulty by the user or is affected by unintended issues such as
Unstable electrical lines, collisions, natural disasters, unclean hygiene, the purchaser must be fully responsible for paying for repair and other replacement expenses)
ARTICLE 4: BUYER'S LIABILITY
6.1 Provide auxiliary systems and handover surface installation equipment. The auxiliary systems include: supply of supplies and preparation of 3 Phase 220V / 50Hz power supply systems for electrical appliances including switches, sockets, power wires, Electric three-phase electric switches, electric lines, steam-lines, gas lines, gas valves, pipes, elbows,
The buyer is responsible for dropping the item at the buyer's address to the correct location
6.2 The purchaser shall be responsible for sending the representative to receive the goods and taking over the test when the equipment has been installed and the instruction manual is used.
6.3 The buyer pays the seller under Article 4 of this contract.
6.4 The expenses such as other expenses for foreign engineers in china will be paid by the Seller.
6.5 The Other expenses such as airplane, visa, travel expenses and dining, hotel for technical will be charged by the buyer,the buyer will be pay for the engineer 120USD each day .
ARTICLE 5: SELLER'S LIABILITY
7.1 Commitment to deliver the equipment to the purchaser in accordance with the type and design of this contract.
7.2 Vendors undertake:
Asian. Ensure time and progress of equipment handover
B. Assurance of quality and content in accordance with agreement requirements.
C. Vendors nominate technical staff to assist, install and guide the buyer to operate and use the equipment well when installing the machine.
点击右上角
分享给朋友吧
© 2025 GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD all rights reserved
Contact us
GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD
Telephone: 020-38912384
Email :
Sales@champion-automation.com
Fax: 020-38912463
Tel: 0086-18816899059, 15018408881
Add:Room 2116,No 101-1 ,Li Xin 12th street, Xin Tang Town, Zeng Cheng District, Guang Zhou, Guang Dong province, China
