Fully automatic servo high-speed vaccum Forming machine

Fully automatic servo high-speed vaccum Forming machine

We are very honored to quote for you is as follows:

Does offer remarks: the offer tax price

Terms of payment.30% deposit in advance, after the completion of the equipment acceptance to pay 65%, the balance 5% will be pay when finish machine.

When the delivery date: after receiving the deposit or start production about 60 working days.

Free warranty period of 12 months (except artificial damage and force majeure event, warranty begins after the debugging)

Does place of delivery: the customer designated location

A, design idea

High efficiency, high quality of PET, PS, PP, PC, PVC, HIPS, flocking pieces and plastic sheet can be disposable vacuum plastic molding, design an effective avoid vacuum forming of air leakage phenomenon, pull piece of different length, thickness of the product not divide evenly, thus reducing the forming difficulty high reject rate of products, to ensure that products are qualified.

Second, the product analysis

According to your requirements: molding, sheet, design a vacuum forming of sheet after heating, and USES the top die high-speed power system from top to bottom, assist to complete the design of the size of high vacuum forming.

To improve the production efficiency and products quality requirements.

And suggested to choose the computer precise temperature control of heating system, combined with high precision servo motor to pull, to avoid the product thickness different size error is produced.According to the design requirements for the machine with functions of transverse once every piece of cut off.According to the requirements of your product size precision and the surface glossiness, need an aluminum precision mold.

Third, blister forming machine

Using electric infrared heating system to effective heating of plastic material, temperature control in do not make plastic material completely curing prolapse of state, to move the sheet by pull-tab motor to forming station, start the servo electric actuator system, auxiliary in power module, through the mould with sheet of plastic material vacuum forming, molding products are moved to the feeding platform, after the conveying system work, make a second operation sheet does not move back to offset, a cutting device length according to need to set manually or automatically, complete, blanking, thereby recycling program, high-speed production.

Advantages: fast heating, pull piece of precision, high production efficiency, scrap rate is low, suitable for all blister products and has the certain difficulty.

Four, the equipment

1, the fuselage structure: the machine is 12 welding, make it more solid frame, more pressure in 40 tons.And according to the need in the key parts adopt bolt connection, easy to install, disassembly and maintenance and replacement.

Four guide pillar 2, forming mechanism: the overall design, and cooperate with the cold plated optical axis, coaxial from mould the mold design.Smooth lifting action thereby, achieve lower die with sheet high precision requirements, the design tonnage of extrusion 2 tons, up and down the template is made of 20 mm steel plate, and grinding smooth, die size design and mould size is consistent, mold adopts the whole aluminum cold water circulating cooling mold.

3, feeding system: adopting the large automatic feeding frame, a feeding 50-300 kg/roll, and USES the biaxial alternate locking technology, motor has positive and negative functions, operation is convenient and slice.

, heating part 4: the ceramic brick infrared heat evenly heating, specular reflection heat insulation plate temperature, temperature control adopts digital electronic voltage regulator temperature control system, make the heating zone temperature is adjustable, flexible is more power saving function, so as to shorten the heating time improve production speed.

5, design of electrical control system: USES in PLC program control, super touch screen as human-machine interface, full Chinese /English input straightforward, easy to operate.Equipment installation stop switch, and to provide security for the production.

6, cutting system: adopting active two-way electric cutting design, high precision cutting products.

7, safety protection: blanking off in organic glass cover installation, safety design has effectively prevent operator wrong operation and strayed into dangerous institutions.

8, pull-in system: adopting servo 3 kw motor, precision error within 0.5 mm, can be used in a variety of blister, color printing, printing, blister sheet.

Five, the equipment function

1 state of flat die air float heating function can be realized to keep heating material plane to prevent material heating state thickness uneven because of prolapse

2 ejection device, difficult to demould easily parting, decrease the damage should be parting and scrap of the products.

3 secondary vacuum and vacuum time delay, according to different material in vacuum forming, can be arbitrary control.

4 chain security protection function to prevent misoperation cause damage to the machine.

5 mould machine can adjust the height, shorten the time of the mould, save the manpower cost.

6 from mould balance synchronizer function, improve the service life of equipment, reduce the product scrap rate.

Specifications configuration : 1, the standard specifications

2、the standard specifications

1. Add PP protection function, high temperature and stable, fast;Equipped with air heat function.

2. The tablet on the electric adjustment, traveling more than 1000 mm;

3. The PET system, production of PET is not easy to crystallization, not prone to white;

4. The mold fast function, can significantly shorten the production cycle time;

5. Water function in advance, time control obviously improve the cooling speed;

6. The cold wind adopts frequency conversion fan, Taiwan close function in advance

7. The car seed, rack, girder stainless steel plate, beautiful, rust prevention, health, durable

Equipment connected by a whole framework, up and down by the high precision servo motor drive, no clearance ball screw feeding schedule.Up and down in the process of the mould clamping tensile speed stability, stop position precision, can effectively solve the product flow mark (water ripple) phenomenon, and the thickness of the up and down around the quality defects such as uneven or stretched too thin.Equipment fluctuation, pull piece and cutting power adopt low-power servo motor, servo drive control.This machine is only equipped with A 5 kw air compressor can work.Servo motor work clamping or overloading, the driver can be changed to 3 x maximum output;Work return or empty the trip, drive can be automatically adjusted to 10% of its power output.At the same time because of the lower die mould clamping force enough, so can reduce the requirement of sheet to temperature, reduce scrap, reach high efficiency production in low temperature.

So electric furnace than traditional vacuum molding machine save electricity 6% - 8%. The comprehensive energy consumption than conventional cylinder driving power saving more than 40%, the production efficiency is 350-500 / hour.

Six, training:

During equipment installation and debugging, the manufacturer shall for party a free of the principle, operation and maintenance personnel for equipment operation, maintenance, maintenance and other aspects of training, after completion of the commissioning and operation training for party b's designated staff, training of operation and maintenance (training should be recorded and the confirmation of both side), independent operation equipment and general level of troubleshooting.

Seven, equipment acceptance:

A device made in the factory, the factory before acceptance, should be carried out upon the acceptance of A delivery.

B, after the completion of installation and debugging of equipment in the factory of party a formal acceptance.

B1, equipment installation is complete, party a by party b can use, trial production.

1) the equipment can run automatically, stable and reliable running.

2) in electric control cabinet lines neatly.

3) equipment painted surfaces smooth, uniform thickness.

4) all the technical data preparation equipment is complete..

5) random spare parts preparation is complete, each device has been delivered to the buyer.

6) in continuous production equipment more than 24 hours, equipment parts there can be no leakage, water leakage, the phenomenon such as oil.

7) production of products to meet party a's quality requirements.

Eight, equipment, quality assurance and service

9.1, equipment warranty period for 1 year.During the warranty period, party b must provide the services, equipment installation and debugging is completed, party b must be the use of tracking devices, in a timely manner to help solve the problem of equipment, guiding equipment maintenance.

1. The humanized design, easy operation;

2. Reduce the material consumption, reduce artificial operation;

3. Improve product quality, reduce product failure rate

4. Improve the production efficiency, production energy consumption reduced