MR ALADDIN : 18816899059@163.com
MR AU: auvuchi@163.com
0086-18816899059
0086-15018408881
OG-120-90 型单层塑料片材挤出机组
OG-120-900 Single-layer Plastic Sheet Extruder
一、 整机主要技术参数
Main technical parameters of machine
l 适用材料：PP/PS 颗粒
Applicable raw material：PP/PSparticles
l 片材有效宽度：800mm；
Sheet width：800mm；
l 片材厚度：0.20-2.8mm；
Sheet thickness：0.20-2.8mm；
l 最高产量：300-350Kg/hr；
Maximum output：300-350Kg/hr；
l 片材结构：单层；
Sheet structure：single layer；
l 电源： 三相, 380V/50HZ Power：three-phase, 380V/50HZ
二、 生产线主要设备技术参数
Main technical parameters of the line equipment.
1、 挤出机Extruder l 挤出量：300-350kg/hr Output: 300-350kg/hr
l 螺杆：直径120mm、 长径比35:1、 长度4355mm
Screw: diameter 120mm, the ratio of length and diameter 35:1, length 4355mm
l 螺杆机筒：38CrMoAlA 优质并经氮化处理、 氮化硬度螺杆≥1000 HV（国家标准≥740HV）、 氮化深度0.4-0. 7mm.
Screw barrel: 38CrMoAlA screw and nitriding treatment, nitriding hardness ≥
1000HV (national standard ≥740HV), depth of nitride 0.4-0. 7mm.
l 螺杆形式：螺旋式
Screw types: spiral
l 螺杆数量：单螺杆
Screw number: single screw
l 电机功率：110KW-6PMotor power: 110KW-6P
l 加热：功率52KW、 段数7、 铸铝加热圈
Heating: power52KW、 7PCS、 cast aluminum heating ring
l 恒溫区: 温控仪控制
Constant-temperature zone: temperature controller
l 螺杆进料水槽冷却形式：水冷
Screwfeed tank cooling: water cooling
l 挤出机专用硬齿面减速机（ZLYJ315 型）：齿轮和轴类零件采用了高强度合金钢材质。 齿轮经渗碳、 淬火、 磨齿工艺加工。 齿轮精度为 GB10095-88,6 级。 齿面硬度 HRC54~62。 在空心输入轴前端配置有大规格推力轴承， 承受螺杆工作时的轴向推力。
Extruder hardened gear reducer (type ZLYJ315): gears and shafts parts are made of high strength alloy steel.The gear is processed by carburizing, quenching and grinding.The gear precision is GB10095-88,6. Hardness of the tooth surface
is HRC54~62. A large size thrust bearing is equipped at the front end of the hollow input shaft, which is able to bear the axial thrust while the screw is working.
l 机架采用方钢， 机器高速运行更加稳定； 电机跟齿轮箱采用直联方式， 提高生产效率。 Frame is steel, the machines will run more stable; the direct connection between motor and gearbox improving production eficiency.
2、 自动液压快速换网器
Automatic hydraulic rapid screen changer
l 形式： 自动液压制双工位换网
Forms: automatic hydraulic double-station screen changer
l 材质：38CrMoAlA 优质材料并经氮化处理
Materials: 38CrMoAlA quality material and nitrogen treatment
l 滤网加热功率：4KW
Filter heating power: 4KW
l 液压站电机功率：2.2KW
Motor power of hydraulic station: 2.2KW
3、 模头(T-DIE)
l 流道形式：T 型衣架式
Flow channel type: T coat-hanger die
l 模头宽度：900mm
Die width: 900mm
l 有效出料宽度：900mm
Efective width: 900mm
l 加热方式：加热管加热 （内热）
Heating type: heating tubes (internal heat)
l 加热功率：12KW、 加熱区 5
Heating power: 12KW,heating zone 5
4、 熔体计量泵Melt dosing pump
型号：200cc/s 电机：11KW
Model:200cc/s Motor:11KW
5、 斜卧式三辊压光机Oblique and horizontal three roller
l 辊筒：渗氮镀铬、 下辊直径 420mm、 中上辊均为直径550mm、 有效长度900mm、 表面粗糙度Ra0.025μm、 表面镀硬铬、 镀层硬度HRC≥55. Roller: Nitrided chromium plating,the diameter of the lower roll is 420mm, the middle and upper rolls are 550mm,efective length is
850mm,surface roughness
Ra0.025μm, surface hard chrome plating, coating hardness HRC≥55
l 压延形式：三辊蜗轮蜗杆压延
Calendering type: three roller worm calendering
l 流延形式：带风刀（三辊可升降）
casting type: with air knife(three rollers can be lifted)
l 传动方式：三辊独立传动
Transmission type:three rollers independent drive
l 辊冷卻方式： 水冷
Roller cooling way: water cooling
l 控制形式：变频 Control type:frequency conversion
6、 牵引机Tractor
l 铝合金牵引辊：8 根×φ80mm×L:900mm； Aluminum alloy traction roller:8pcs ×φ80mm x L:900mm;
l 胶辊胶层硬度：≥邵氏 A60 度The hardness of the adhesive layer: ≥ shore A60
l 胶辊直径：φ180mm*790mm Roller diameter: φ 180mm*790mm
l 切刀：升降、 宽幅手摇丝杆可调， 操作简单Cutter:operation is simple,the lifting and width can be adjusted by hand.
l 牵收速度：变频调速Traction Speed:frequency control.
l 夹紧、 开启形式：气缸升降 Clamping and openingform: cylinder lift
7、 收卷机 Winder
l 油压双工位收卷
Oil Pressure Double-Position Rewinding
l 卷取直径：1500mm
Winding diameter:1500mm
卷心直径：φ110mm
Roll core diameter: φ 110mm
收卷架：6个
Winding rack: 6 pcs
8、 电控柜 （1）Electric control cabinet （1)
主要技术参数 Main technical parameters
最大产量Max.output | 350Kg/hr |
螺杆直径Screw diameter | 120mm |
片材厚度Sheet thickness | 0.20-2.8mm |
片材宽度Sheet width | 800mm |
压光辊直径Roller diameter | φ420- φ550- φ550 |
压光辊调距范围Roller pitch range | 30mm |
长径比Length-diameter ratio | 35:1 |
模头宽度Die width | 900mm |
压光辊辊面长Calender roll surface length | 900mm |
压光辊个数Number of roller | 3 |
挤出电机功率Extruder motor power | 110Kw-6 |
料筒加热功率Barrel heating power | 52Kw |
模头加热功率Die head heating power | 12Kw |
换网器加热功率Screen changer heating power | 6.5Kw |
三辊独立传动电机功率Three roller independent drive motor power | 3. 7Kw |
收卷电机功率Rewinding motor power | 2.2Kw-6 |
耗水量Water consumption | 20m3/h |
整机功率Overall Power | 180KW |
整机安装尺寸Overall dimension | 15m*2.0m*2.2m |
整机重量Total weight | 12 T |
FOB Guang Dong China.
- Delivery time: The Seller will hand over the goods to the buyer after 45 business days, excluding Saturdays, Sundays and public holidays (1-5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment
- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install
Set up :
- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.
Acceptance :
l Equipment that is considered valid must meet the following requirements:
l ü Specifications and functions of the machine match the content of this contract.
l ü Electrical, mechanical and control systems run smoothly.
l ü Run out sample products as required.
l ü Must have a certificate of quality of the place of production and documents attached to the machine.
ARTICLE 2: PAYMENT METHOD
v The buyer makes payment to the seller in 02 times by transfer to the seller's account.
v v First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.
v v 2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer (IF YES). The seller will send a notice of delivery to the buyer.
ARTICLE 3: WARRANTY
Warranty period: within 12 months from the acceptance date of the equipment.
During the warranty period, if the equipment is defective by the manufacturer of the Seller, the Seller is responsible for the presence at the purchaser factory within 48 hours of being notified to repair the equipment. All costs incurred will be borne by the Seller.
(If the device is faulty by the user or is affected by unintended issues such as
Unstable electrical lines, collisions, natural disasters, unclean hygiene, the purchaser must be fully responsible for paying for repair and other replacement expenses)
ARTICLE 4: BUYER'S LIABILITY
1 Provide auxiliary systems and handover surface installation equipment. The auxiliary systems include: supply of supplies and preparation of 3 Phase 220V / 50Hz power supply systems for electrical appliances including switches, sockets, power wires, Electric three-phase electric switches, electric lines, steam-lines, gas lines, gas valves, pipes, elbows,
The buyer is responsible for dropping the item at the buyer's address to the correct location
2 The purchaser shall be responsible for sending the representative to receive the goods and taking over the test when the equipment has been installed and the instruction manual is used.
3 The buyer pays the seller under Article 4 of this contract.
4 The expenses such as other expenses for foreign engineers in china will be paid by the Seller.
5 The Other expenses such as airplane, visa, travel expenses and dining, hotel for technical will be charged by the buyer,the buyer will be pay for the engineer 200USD each day .
ARTICLE 5: SELLER'S LIABILITY
1 Commitment to deliver the equipment to the purchaser in accordance with the type and design of this contract.
2 Vendors undertake:
Asian. Ensure time and progress of equipment handover
B. Assurance of quality and content in accordance with agreement requirements.
C. Vendors nominate technical staff to assist, install and guide the buyer to operate and use the equipment well when installing the machine.
点击右上角
分享给朋友吧
© 2025 GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD all rights reserved
Contact us
GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD
Telephone: 020-38912384
Email :
Sales@champion-automation.com
Fax: 020-38912463
Tel: 0086-18816899059, 15018408881
Add:Room 2116,No 101-1 ,Li Xin 12th street, Xin Tang Town, Zeng Cheng District, Guang Zhou, Guang Dong province, China
