OG-120

1,OG-120 PE Foam Extrusion Machine（380V,3PHASE,50HZ）

I、Technical Parameters:

1.     Screw Φ120mm, with the material of 38 CRMOALA, alloy steel, hardness treatment, surface with nitride treatment. The angle of the screw add one time of alloy treatment, more hard and more durable.

Rotation speed: 0-48rpm .                                                   1set       

2.     Reduction gear box: 280-II, China national standard, no grade

helical gear box .                                                                1set

3.     Main motor:    75KW/4/380V

(SIEMENS MOTOR/JIANGSHEN)                                       1set

4. Main inverter: 75KW/4/380V (SINEE INVETER)                 1set

5. Intelligent temperature controlling with touch screen           1 set

6. Solid state relay, without touch spark. 1 set

7. Auto filter ex-changer with two net frames                          1set

8.  Cooling system by dropping water and wind.                     1set

II、Characters of the products:

1.      Capacity: 100-160kg/hr 

2.      Thickness of the sheet: 0.5mm-7.0mm

3.      Width of the sheet: 1000-1600mm

4.      Density of the products: 18-40 kg/m³

5.       Linear Speed: 10-80m/ min

 III、Parts list:

(1)     Main Body

1.        Main Body frame, stainless steel flume, reduction gear box.

2.        Φ120mm screw and barrel                                                     1 set

3.        Auto filter ex-changer                                                             1 set

4.        Die                                                                                         1 set

5.        Die lip for sheet                                                                      2 sets

6.        Electrical control cabinet and the computer controlled

Console, with air switches.                                                    1 set  

(2)    Feeding part

1.   Feeding platform and ladder with anti-slip handrails          1 set 

2.   Automatic resin-lack alarm device                                      1 set 

4.      100KG  blender                                                                 1set

5.      Vacuum auto-loader（300G）,                                          1set

5.  Talcum powder/ granule machine,                                     1set

     With inverter assembled in the cabinet.

(3)  Additive injection unit

 1.   Butane pump 80 L/H (Two heads model)                  1 set 

2.   Gas- water separator                                                  1set 

3.   GMS pump 10L/H                                                       1set 

(4)  Shaping part

1.   Shaping drum                                                             2sets

2.   Electrical round knife                                                  1set

3.   Air ring and base                                                        1set

4.   1.1KW intermediate pressure blower                         2sets

5.   Cooling device                                                           1set

(5)  Expanding and cooling part

1.   Expanding frame                                                        1group

 (6)  Traction part (inverter controlling)

1.      Applying torque traction, the speed is smooth

2.      Traction roll                                                                1set

3.      Rubber Ex-pander roll                                                1set

4.      Static eliminator                                                         1set

5.      Meter counter Korea brand, Autonics.                       1set    

(7)      Rewinding part

1. Traction and rewinding control cabinet                      1set

     Alarm when to the presetting length

2.Torque motor 100kg                                                 2sets

Ⅳ、Spare parts

1. Butane Pump Spare Part                                       1set

2. GMS Pump Spare Part                                          1set

3. Solid state relay                                                      2pcs  

4. Intermediate relay                                                   1pc  

5. Thermocouple                                                         3pcs  

6. Pressure gauges (0-60)                                          2pcs  

7. Potentiometer (multi-turn, 10K)                             2pcs each  

8. Ammeter (0-30)                                                       2pcs  

9. Select, button switch                                               2pcs each  

10. Barrel heating ring  (Stainless steel)                     1set

11. Die heating ring                                                     1full set,

have how many size, then each size have 1pc 

12. Cast aluminum heating ring for barrel                   1set                          

13. Filter net heating pipe (shorter one)                      1pc

14. Filter net heating pipe (longer one)                       1pc                                 

15. GMS pump heating ring (round ring around)        1pc

16. GMS pump heating ring (bottom round plate)       1pc

17. Monkey wrench                                                     1set 

18. Water pipe wretch                                                 1set

19. Inner-hexagonal wrench                                       1set

20. Inner-hexagonal wrench (14,17, 19,12)                1set

21. Screw Drive  + and -                                              each 1pc

22. Small - screw drive                                                1set

23. Scissor                                                                   1set

24. Stainless steel connector for the butane pipe         4pcs

25. Butane Gas Pipe                                                   1pc

26. One way valve                                                       1set

27. Jump Ring                                                              2pcs

28. Lock Mould Rod                                                     1pc

29. Shaping drum sleeve                                              1pc each

30. Pneumatic Gun                                                       2pcs

31.  Heating belt 5m/1pc for GMS pump                      1pc

32. Copper Blade                                                          1pc

33. Tool Box                                                                  1set

 2, OG-1000 PE Foam Bag Making Machine (380V/3PHASE/50HZ)

Specifications:

Bag-width:  80-1500mm (open side width);

Max. bag depth: 920mm;

Speed: 20-130 ppm (pc/min.)

 Total power: 7.5KW

Water consumption: 30L/Min

Suit for bubble film and EPE foam rolls

 Out dimension: 3000x1.5x1.5mm

Main parts:

1). bag-making machine                                1 unit;

     Motor  Motor 1.5KW & 0.75KW                       2sets

     Inverter 1.5KW/SET                                          2sets

TEMPERATURE CONTROLLER                     1SET

     PLC CONTROLLER         1GROUP

     SERVO MOTOR, 1GROUP

2). back film feeder                                1 unit;   

     MOTOR 2SETS 375W/SET

3). Triangle folding frame                         2sets;

Other parts:

1). Heater tubes                                    2 pcs       

2). front feeding belts                            5 pcs

3). feeding spring                                        100 pcs   

4). Hand tools                                       1 set       

3,OG-2200 EPE Foam Sheet Vertical Cutting Machine (380V,3PHASE,50HZ)

Main parameters:

Motor，

Wheel，

Grinding motor，

Knife strip，

Grinding wheel，

Strap wheel，

Track worktable，

Locating board，

Electricity box，

Dimension: 3400*3000*1850mm

Work platform: 2200(1220+1240)mm

Cutting height:850mm

Motor power: 1.55KW

Rated voltage: AC380V

4,OG200-125 EPE Recycling Machine (380V/50HZ/3PHASE)

1. Main Motor    37KW/380V/50HZ                  1set

2. Hopper with auto crushing device inside  1set

3. Guard cover                                                 1set

4. Gear Box (National Stander Model)             1set

5. Screw (cone-shaped)         Φ200-125mm，1set

6.  Temperature controller                               4sets

7.  Exhaust type                                     single type

8.  Heating of the barrel         4KW*4 zones=16KW

9. Filter ex-changer

with hydraulic driving                                1set

10.  Stainless steel water slot                          1set

11.  Brush for and fans for drying                  1set

12. Cutting machine, with inverter controlling,

use hard round cutter inside                   1set

13. Granule container                                        1set

14. Cabinet, use high quality electrical parts,

with cooling fans,big model                      1set

Machine heating system use new design,

use electromagnetic heating system.

Total power: 61.4 KW

Capacity ：130-180 kg/h

Spare parts

1. Ac contactor                                                 1pc

2. Ampere meter                                              1pc

3. Thermocouple                                              1pc

4. Heater                                                           1pc

5, OG-600L Hot Melt Glue Machine

Parameter：

                    Model：OG-600L，

                    Dimension：1200x350x320mm，

                    Length of the roller： 600mm,

                    Rated Voltage：AC220V，

                    Rated Power：2.2KW，

                    Roller Rev.：0-200 rpm。

                    Two rollers model, take one roll off,

can be used as one roller model.

Function:

It’s mainly used for applying hot glue to epe sheet, sponge, shoes material, EVA materials, for shaping.

6,EPE FOAM SHEET AUTO-CUTTING  MACHINE(380V,3PHASE,50HZ)

(Max. can run 5 layers/5 rolls in one time.

For cutting thickness max less than 12mm)

The traction width is 1300mm

The material shelf width is 1300mm

Machine body roller is 1200mm model

Speed around 200m/min, if the cutting length less than 400mm

Can cut 50 times per min. Is less than 400mm.

Also can set to cut 2000mm, but speed for each pc will be slower.

Valid cutting thickness: 0.5-12mm.

Standard round cutting blade: 5pcs)

(NO HAVE HOLE PUNCHING PARTS AND MOULD)

7,OG-1600 EPE Foam Sheet Coating Machine（380V/50HZ/3PHASE)

1.Main motor  2.2KW/4/380V/50HZ                                  1set

2.Torque motor 100KG（YLJ112-10-6)                               1set

3.Bearing with base                                                           8sets

(A:F214)2sets(B:P210) 4sets(C:T209)2sets

4. Worm wheel reducer   WPA—A80(1:20)                          1set

5. Rubber expanding roller with dia. of 100mm, length of 1750mm.     1set

6. Transducer  2.2KW                                                         1 set

7. Tube heater  (￠19x1760)                                                6pcs

8. Collecting ring                                                                 1set

9. Feeding axis                                                                    1pc

10. Winding axis                                                                    1pc

11. Oil heating roller                                                             1pc

      5*5mm grid, with tower inside model, deeply treated

 12. Rubber pressing roller 1750mm                                1pc

13. Electrical cabinet                                                          1set

14. Trimming knife                                                              4sets

15. The coating valid width: 500-1600mm

     Assembling dimension: 3100x2700x1750mm

Spare part:

 1. Carbon Brush                                                                 2pcs

        2. Heating pipe                                                                   1pc

3.Screw driver + and - （each 1 pc）                                2pcs

       4.Inner- hexagonal wrench1.5-10                                1set

        5.Screw                                                                                1set

        6. Cutting blade                                                                   1box

Function: This machine can coat one layer of plastic film, aluminum foil, craft paper or other web material onto the PE foam sheet. And it also have embossing functions. The heating method is oil and power heating.

(Note： Use new model, have two places controller model, 1. at the main cabinet, 2. at the winding place.)

8,OG-1600 EPE Foam Sheet Horizontal and vertical  Cutting Machine  (380V/3PHASE/50HZ)

(Servo-Motor System)

Model:  OG-1600mm, the valid biggest cutting width is 1450mm.

Total Power: 5KW/380V/50HZ

Cutting Height: 2-120mm

1.Feeding frame                                                             1set

2.Main body                                                                    1set

3. Main motor 3.8KW, Servo motor                              1set

4. Motor for round blade, 1.5KW                                  1set

5. Motor for lift, 200W                                                    1set

6. Cutting blade                                                              2pcs

7. Table after the main body, with sensor                   1set 

8. Tool Box                                                                     1set

Main body dimension: 2100*950*1200mm                                       

Working dimension: 6000x5000x1300mm

Weight: 900KG

9,OG-1800 EPE Foam Sheet Fast Bonding Machine（380V/3PHASE/50HZ)

1.Main motor                                       4KW/380V 

2.Main inverter                                    4KW/380V 

2.Reduction motor                               1set       

3.Reducer                                            3sets

4.Traction roll                                       2sets

5. High pressure blower                       2sets

6.Main body（very solid structure）    1set

7.Spacing frame                                    2sets

8.Heat gun (High quality heating gun)  5sets*16KW    

9. UP and down Air cylinder  1set

10.Forward and back off air cylinder    1set

11.Chain wheel                                    1set

12.Electrical cabinet                             1set

13.Blower pipe                                     1set

14.Linear shaft                                    2sets

15.Material shaft                                 4sets                             

16.Hand wheel                                    1set

17.Pin Roller                                       1set

18.Winding Machine                           1set

                      (Note: This winding machine have cylinder system,

                        Can push the material down from the air shaft directly.)

                 Total Power:84KW

                  Bonding speed: 35-80m/min

                  Max. Bonding Thickness: 100mm

Roller width: 1800mm

Valid bonding width: 1650mm.

Spare part:

Tool box,                                                  1pc

Switch                                                       2pcs

Potentiometer                                          1pc

Inner- hex-angular spanner 1.5-10         1set