OG-35B Twin Screw PP Plastic Granulator Line

 OG-35B Twin Screw PP Plastic Granulator Line

1.Cargo description

DETAILED SPECIFICATION 

NO.	QTY	Description
1-1	1 set	Feeder: T20 single screw
		l Motor:0.75kw l Inverter:0.75kw (V&T) Function: quantitative feeding machine, through frequency converter to adjust the feed speed, can improve the service life of the screw
1-2	1 set	Extruder
		Screw and Cylinder	l Made of high grade W6Mo5CrV2 High-temperature vacuum quenching heat treatment l Screw Dia: Φ35.5mm l Long dia. Ratio:40:1 l Cylinder:Alloy insert bushing
		Gear box	l Gear made of 20CrMoMn l Gear box model : 35B Hard teeth surface
		l Gearbox speed ratio:3: 1. The deceleration and torque distribution parts of the main transmission box are integrated, adopting a parallel three-axis design and a compact structure. NSK bearings are used for deceleration, torque distribution, and two output shaft radial bearings l Core shaft: made of 40CrNiMoA material, the threaded components are connected to the core shaft in an involute shape, with high strength, high load-bearing capacity, and convenient disassembly and assembly. Screw element: Cr12MoV alloy material, high-temperature vacuumquenching heat treatment
		Motor and Inverter	l Motor size :.18.5kw-4p l Brand : Yinmengda Beide l Inverter :18.5kw (V&T) l Power supply:380v 50hz 3P
		Heater	l Cast iron heating   l Heating power:3.6kw
		Cooling	l 10 sets of Solenoid valve water cooling temperature control
		Function	l Melt and mix the plastic, squeeze out the brace with a filter
1-3	1 set	Main extruder screen changer
		l Filter : 1 filters l Quick dismantling of the mold head, easy to disassemble and clean Function:filtering the impurity from the plastic
1-4	1 set	Control Panel
		l Solid state relay controls heating circuit l Yatai Temperature Controller l The distribution cabinet adopts the Fangweitu electrical cabinet Function: control the heating and operation of the equipment
1-5	1 set	Vacuum and Cooling Systems
		l Vacuum motor power:3kw l Material:201 Stainless steel Function : The vacuum system removes the air in the material, and the resulting particles have good gloss and firmer particles; the cooling system cools the cylinder and controls the temperature more accurately
2	1 set	Water cooling tank
		l Made of stainless steel l Length of the tank : 2400 mm Function : cooling the strip by water
3	1 set	Plastic Pelletizer
		l Model : 60  l Blade size :Φ120*96 l Blade teeth No. : 14pcs l Motor :2.2kw l Inverter:2.2kw l Max capacity: 100kg/h l Machine size :1000*600*1200mm Function : make the pellet
4	1 set	Particle receiving hopper
		l Model : 200L  l Volume:200 L l Size : 1000*1000*600 mm l Material : stainless steel Function : Collect the particles cut by the plastic granulator
5

FOB Guang Dong China.

- Delivery time: The Seller will hand over the goods to the buyer after 30 business days, excluding Saturdays, Sundays and public holidays (1-5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment

- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install

Set up :

- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.

Acceptance :

l Equipment that is considered valid must meet the following requirements:

l ü Specifications and functions of the machine match the content of this contract.

l ü Electrical, mechanical and control systems run smoothly.

l ü Run out sample products as required.

l ü Must have a certificate of quality of the place of production and documents attached to the machine.

ARTICLE 2: PAYMENT METHOD

v The buyer makes payment to the seller in 02 times by transfer to the seller's account.

v v First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.

v v 2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer (IF YES). The seller will send a notice of delivery to the buyer.

ARTICLE 3: WARRANTY

Warranty period: within 12 months from the acceptance date of the equipment.

During the warranty period, if the equipment is defective by the manufacturer of the Seller, the Seller is responsible for the presence at the purchaser factory within 48 hours of being notified to repair the equipment. All costs incurred will be borne by the Seller.

(If the device is faulty by the user or is affected by unintended issues such as

Unstable electrical lines, collisions, natural disasters, unclean hygiene, the purchaser must be fully responsible for paying for repair and other replacement expenses)

ARTICLE 4: BUYER'S LIABILITY

1 Provide auxiliary systems and handover surface installation equipment. The auxiliary systems include: supply of supplies and preparation of 3 Phase 220V / 50Hz power supply systems for electrical appliances including switches, sockets, power wires, Electric three-phase electric switches, electric lines, steam-lines, gas lines, gas valves, pipes, elbows,

The buyer is responsible for dropping the item at the buyer's address to the correct location

2 The purchaser shall be responsible for sending the representative to receive the goods and taking over the test when the equipment has been installed and the instruction manual is used.

3 The buyer pays the seller under Article 4 of this contract.

4 The expenses such as other expenses for foreign engineers in china will be paid by the Seller.

5 The Other expenses such as airplane, visa, travel expenses and dining, hotel for technical will be charged by the buyer,the buyer will be pay for the engineer 200USD each day .

ARTICLE 5: SELLER'S LIABILITY

1 Commitment to deliver the equipment to the purchaser in accordance with the type and design of this contract.

2 Vendors undertake:

Asian. Ensure time and progress of equipment handover

B. Assurance of quality and content in accordance with agreement requirements.

C. Vendors nominate technical staff to assist, install and guide the buyer to operate and use the equipment well when installing the machine.