MR ALADDIN : 18816899059@163.com
MR AU: auvuchi@163.com
0086-18816899059
0086-15018408881
OG-HD50 bio-degradation blowing film machine（PLA）
Main parts manufacturers | Die head -- factory product; Taiwan type high speed double air duct ring Main motor, guangdong motor; Inverter ---- Guangdong Kewo; Main electrical accessories ---- Chint; Solid state relay ---- Mingyang, Taiwan; Small circuit breaker, ac contactor, intermediate relay, button -- in joint venture import card; Host inverter switch, main switch -- Chint; Ammeter, voltmeter, control transformer -- domestic well-known brand; |
Complete machine disposition | Single screw die head Double tuyere high speed air ring Friction single winding The standard six screw fixed change network of 2 sets; Independent barrel cover and stainless steel hopper; Pneumatic control traction; The central reduction box controls the foam frame; |
1.Basic Requirement：
Items | Parameter |
The cots are effective | 760mm can make film≤660mm |
Blown film thickness | 0.01-0.15mm; |
Maximum capacity | 45-70KG/h |
Suitable raw material | PBAT/PLA/LLDPE and recycled materials, suitable for 50% secondary materials |
| |
OG-HD50 bio-degradable blowing film machine parameters:
Items | Parameter |
Host part | OG-HD50 bsingle screw film blowing machine |
Square tube structure | 120 × 120 thickened square pass |
Off shelf length | 1900*2500*3200 mm |
Shelf length | 1000*900*1800 mm |
Total height of fuselage | 5000mm（Taiwan-type structure） |
Main engine motor power | 15KW( Guangdong Feng Heng ） |
| |
Host frequency conversion power | 15KW( Kovo, Shenzhen） |
screw | Φ50,1:30 bimetal screw; material 38CrMoAlA, high output, low energy consumption, good plasticizing and so on. Zhoushan, Zhejiang province |
Screw speed | 5-110r/min |
Barrel heating temperature control | Bimetal cylinder, using Changzhou Huibang temperature control meter temperature control (Zhoushan, Zhejiang province） |
Wave box | Type 173 box with oil lubrication pump, heat dissipation (Changzhou heavy branch) |
Die head | Φ120ldpe LLDPE (biodegradable)(made of high-quality 40CR, forged, tempered, CNC machining, polishing, hard chromium plating, to ensure the precision of die thickness) |
| |
Air Ring | Adopt double tuyere high speed air ring (high quality cast aluminum alloy) replaceable inner core (Dalian Mingqiang) |
| |
Rack traction | 1.1 kw Taiwan Yongkun motor with frequency conversion with reducer (dynamic balance processing) |
Traction clamping | Pneumatic control closure |
| |
Foam stabilizer | Mouse Cage Type (material aluminum guide roller) |
Fan | 2.2 kw high pressure fan with frequency conversion (Guangdong Fengyi fan) |
Cooling Fan | 250W * 2 three-phase centrifugal fan (Guangdong Fengyi fan) |
| |
Embossing stick | (net flower, square flower) according to customer requirements custom |
Winding part | Type 760 friction single take-up (with pneumatic blanking) , inflation shaft 2(shaft head lengthening) |
Electric Cabinet | 6 sets of high precision temperature controller (huibang, Changzhou) , master switch (Zhengtai) , ammeter, voltmeter, control transformer (well-known brand) |
 | |
Overall power | About 40 kw; voltage 380 v50 Hz |
film blowing machine parameters：
Items | Parameter |
Host part | Single screw single die blow film machine |
Square tube structure | The first layer is 120*120 square tube, the second layer is 120*120 square tube, the third layer is 100*100 square tube, the thickness is 3MM |
Total height offuselage | 5000mm 5000mm (Taiwan type structure) |
Machine size | 6000MM*2500MM*5500MM |
Fuselage weight | ≈3T |
Fuselage color | Orange 5088/ Wrinkle white 1388/ (all paint treatment) |
Customer optional included | Rotating film |
suction machine | |
Sparking machine | |
Technical parameter
一,Extruder: SJ50X 1 set(1:32) host
Single screw plastic extruder φ65mm (1 set) (screw after special hardening treatment, not only has good corrosion resistance and wear resistance, but also has high output, low energy consumption, good plasticizing characteristics);
1. 1 Screw diameter φ65mm, length-diameter ratio 32:1;
1.2 Material: Japan SACN645, surface nitriding;
1.3 Barrel bore diameter φ50mm, length-diameter ratio 32:1;
1.4 Material: inner hole nitriding;
1.5 Screw speed: 5-110r /min;
1.6Extruder temperature control
a 、 The charging port of the barrel is forced to be cooled by water (cooling by circulating water to further improve efficiency and extend service life), and the charging section and mixing section are made of cast aluminum heating rings;
b 、Barrel heating: 3 groups, Huibang temperature control meter temperature control;
c 、Barrel cooling fan: 250W fan, 3 sets per section;
1.7 Reduction box
a 、Gearbox lubrication mode: forced oil circulation lubrication;
b 、Gearbox cooling mode: forced water circulation cooling oil temperature;
c 、Gearbox oil filter method: removable external oil filter with cooler
d 、1Model 146 reducer with 29424 thrust bearing, front direct transmission
1.8 The main motor power of the extruder is 15kw ×1 set, using Guangdong motor, equipped with Covo inverter;
1.9
Six screws to secure the net.
一,Mold and wind ring
Single die head (1 set)
Single die head (1 set)
The material is special alloy steel, machined by precision machining center
φ100mm LDPE degradation die head;
Ring heating
Die runner, die polishing, hard chrome plating
Origin: Henda Products
Double vent air ring 1 set
Specifications: Inside diameter Φ120mm LDPE double air ring
Material: high quality cast aluminum alloy
Origin: Henda
Fan power: 4 kw high pressure fan (with Kovo inverter)
Central air inlet base: 1 set
二, Stationary pneumatic control traction
Bubble rack (1 set)
Structure type: squirrel cage type
Tape regulating device
Material: Aluminum guide roller, can reduce the damage to the film
Miter clip arrangement (1 set)
Herringbone plate: steel structure frame, herringbone plate rolling guide roller are through dynamic balance treatment
Plywood roller: solid wood strip
Traction device
First traction motor power: 1.1KW (with Senlan inverter control)
The first traction steel roll: ￠165mm x760mm surface plated hard, dynamic balance treatment.
The first traction roller: ￠165mm x760mm butadiene rubber, dynamic balance treatment
Lead roller: ￠80mm x760mm, dynamic balance treatment
Control mode: pneumatic control
The printing machine
2. Main technical parameters
1. Flow direction: from right to left
2. Printing color count: 2 colors, 2 sets
3. Maximum printing width: 700mm
4. Maximum substrate width: 850mm
5. Maximum mechanical speed: 60m/min
6. Maximum printing speed: 50m/min
7. Maximum unwinding diameter: φ700mm
8. Maximum winding diameter: φ700mm
9. Inner diameter of paper tube for collecting and unwinding: φ76
10. Printing plate roller diameter: φ70mm～φ330mm
11. Color matching accuracy: Vertical ≤ ± 0.15mm (manual alignment)
Horizontally ≤± 0.15mm (manually aligned)
(1) Scraper blade movement: ± 5mm
(2) Heating method: electric heating
(3) Drying temperature: maximum temperature rise of 60 ℃
(4) Drying power consumption: 12kw (2 × 6kw)
(5) Total power of the machine: 15kw
(6) Machine weight: approximately 1500kg
(7) Dimensions: L2000mm × W1900mm × H1950mm
FOB China.
- Delivery time: The Seller will hand over the goods to the buyer after 50 business days, excluding Saturdays, Sundays and public holidays (1-5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment,from the day confirm the sample draw(if have)
- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install
Set up :
- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.
Acceptance :
l Equipment that is considered valid must meet the following requirements:
l ü Specifications and functions of the machine match the content of this contract.
l ü Electrical, mechanical and control systems run smoothly.
l ü Run out sample products as required.
l ü Must have a certificate of quality of the place of production and documents attached to the machine.
ARTICLE 2: PAYMENT METHOD
v The buyer makes payment to the seller in 02 times by transfer to the seller's account.
v v First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.
v v 2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer (IF YES). The seller will send a notice of delivery to the buyer.
ARTICLE 3: WARRANTY
Warranty period: within 12 months from the acceptance date of the equipment.
During the warranty period, if the equipment is defective by the manufacturer of the Seller, the Seller is responsible for the presence at the purchaser factory within 48 hours of being notified to repair the equipment. All costs incurred will be borne by the Seller.
(If the device is faulty by the user or is affected by unintended issues such as
Unstable electrical lines, collisions, natural disasters, unclean hygiene, the purchaser must be fully responsible for paying for repair and other replacement expenses)
ARTICLE 4: BUYER'S LIABILITY
1 Provide auxiliary systems and handover surface installation equipment. The auxiliary systems include: supply of supplies and preparation of 3 Phase 220V / 50Hz power supply systems for electrical appliances including switches, sockets, power wires, Electric three-phase electric switches, electric lines, steam-lines, gas lines, gas valves, pipes, elbows,
The buyer is responsible for dropping the item at the buyer's address to the correct location
2 The purchaser shall be responsible for sending the representative to receive the goods and taking over the test when the equipment has been installed and the instruction manual is used.
3 The buyer pays the seller under Article 4 of this contract.
4 The expenses such as other expenses for foreign engineers in china will be paid by the Seller.
5 The Other expenses such as airplane, visa, travel expenses and dining, hotel for technical will be charged by the buyer,the buyer will be pay for the engineer 200USD each day .
ARTICLE 5: SELLER'S LIABILITY
1 Commitment to deliver the equipment to the purchaser in accordance with the type and design of this contract.
2 Vendors undertake:
Asian. Ensure time and progress of equipment handover
B. Assurance of quality and content in accordance with agreement requirements.
C. Vendors nominate technical staff to assist, install and guide the buyer to operate and use the equipment well when installing the machine.
点击右上角
分享给朋友吧
© 2025 GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD all rights reserved
Contact us
GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD
Telephone: 020-38912384
Email :
Sales@champion-automation.com
Fax: 020-38912463
Tel: 0086-18816899059, 15018408881
Add:Room 2116,No 101-1 ,Li Xin 12th street, Xin Tang Town, Zeng Cheng District, Guang Zhou, Guang Dong province, China
