OG-SJ65/25 PVC Edge Banding Production Line

OG-SJ65/25 PVC封边条生产线

OG-SJ65/25 PVC Edge Banding Production Line

一，Production line required conditions and related requirements

1.1 Raw materials and output:

1.2 Working condition

1.3 Energy consumption

2、Configuration and Price：

3,Parameters and related properties

1. Main technical parameters of SJ-65 single screw extrusion machine production line:

(1) SJ65 single screw extrusion machine: one

1. Screw diameter: 65MM

2. Aspect ratio: 25: 1

3. Screw speed: 38r/min

4. Effective length of screw: 1600MM

5. Main motor: 18.5KW (frequency conversion speed regulation)

6. Barrel heating power: 10KW

7. Output: 60KG/H

8. Screw and barrel material: 38CrMoALA

9. Nitriding layer depth: 0.5-0.8MM

10. Barrel cooling: strong air cooling in the second to fourth zones of the barrel

11. Surface hardness: HV800-900

12. Installed capacity: 28.5KW

13. Main electrical appliances: CHB402 quantity high-precision temperature control meter (accuracy ±1°), French Schneider contactor,

Low voltage circuit breaker, antenna terminal made in Taiwan

14. Weight: about 950KG

15. The gearbox adopts domestic gearbox products

16. The barrel screw adopts the products of China Plastics Company.

17. The motor adopts domestic motor products.

(2) One 3.5m cooling water tank

Box width X length: 300X3500mm

Center height: 1000mm

Front and rear, up and down, left and right with manual adjustment

Tank material: stainless steel

(3), a double-out traction glue machine (back glue)

 Center height: 1000mm

 Traction maximum width: 60mm

 Traction motor power: 0.75KW

 Traction speed: 0.4m-15m/min (frequency conversion speed regulation)

(4) Two vertical winders

0.75KW DC motor, can rewind 200M flat film, with meter counter.  \       

(5) A set of PVC edge banding moulds

 (specifically customized according to product shape and size)

(6) Two sets of PVC edge banding rollers

 (Need to be determined according to the product sample)

(7)spare part