MR ALADDIN : 18816899059@163.com
MR AU: auvuchi@163.com
0086-18816899059
0086-15018408881
Products introduction：
This machine is special for polystyrene. It adopts single screw, double stage plasticification, increasing compress ratio. The whole machine consists of, main machine, cooling tank and granulator. It can recyle many foamed products, such as ps, xps, eps etc.
1. 包括以下主要部份 Including main parts as the following:
序号 No. |
名称 Name |
图片 Picture | 件数P c |
C |
Φ270+Φ135 挤出机 Φ270+Φ135Extruder 一级螺杆长 2000mm 一级螺杆直径： 270mm+135mm 电机： 22KW, 变频器控制 主电机带动减速箱工作。 First screw length: 2000mm First screw diameter: 270mm+135mm Motor: 22KW, driven by inverter. Main motor drives gear box. (1)螺杆机筒： 材料均为优质钢 机筒采用 4 区加热， 加热电压 380V ⑵ 减速箱为硬齿面 225-16,材质 FCD25 可锻铸铁, 齿轮： SCM4 特殊齿形磨光和加热处理。 The screw and the barrel Material: High quality steel Barrel heating zones: 4pcs Voltage: 380V 2) Gearbox: Model: hard tooth-surface 225-16 Material: FCD25 malleable cast iron. Gear wheel: SCM4 special gear wheel burnishing and heating dealing. |
|
1 套 1 s e t |
D |
换网器 Screen changer 换网操作简单方便，不漏料。 The operation of changing net is easy and convinient ，without leaking. |
|
1 套 1 s e t |
E | 主控箱 Main control cabinet (1)热电偶传热。温度控制准确 Heat is transfered by thermocouple. The temperature is controlled accurately (2) 智能温度控制器由PID 控制，交流接触器 执行 Brainpower temperature controller is controlled by PID, AC contactor execute (3) 交流接触器,空气开关及电器均采用国内 知名品牌。 AC contactor, air switch and electrical equipments all adopt domestic famous brand. (4) 温控表准确显示各区温度及控制加热系统 加热 The temperature controller shows each zone temperature accurately and controls heating system (5)电控系统共 4 个控制区， The electric control system has total 4pcs control zones. |
|
1 套 1 s e t |
G | 不锈钢水槽 Stainless steel water tank 不锈钢水槽，一个进水口， 一个出水口，循环水 冷却。 Stainless steel tank，one water inlet, one water outlet, cooled by cycling water 水 槽 尺 寸 : 2000mm×600mm×280mm Water tank size: 2000mm×600mm×280mm |
|
1 套 1 s e t |
H |
切粒机 Cutter 切粒电机功率： 2.2KW Pellet cutter motor power: 2.2KW 变频器控制，切粒均匀， 美观。 It was controlled by inverter, and the granular is well-distributed and beautiful. |
|
1 套 1 s e t |
I | 送料架 Material conveying rack 防止料条下落， 使设备整体更美观 Avoid material dropping to ground. make whole m achine look beautiful |
| 一 套 1 s e t |
2,技术要求 Technical requirement
产量:50-100KG/H；
Output:50~100kg/h
压料电机功率:1.5KW；
Pressing material motor power: 1.5kw
装 机 容 量 :42KW
Mounted power: 42kw
用电要求:380V 三相 50HZ；
Power requirement: 380v three-phase/ 50HZ
冷却水压:≥0.2Mpa；
Cooling water pressure: ≥0.2Mpa
成套尺寸:4m×4m×3m；
All size: 4m×4m×3m
机组重量:2T
Total weight: 2T
-FOB any port of China.
- Delivery time: The Seller will hand over the goods to the buyer after 30 business days, excluding Saturdays, Sundays and public holidays (1-5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment
- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install
Set up :
- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.
Acceptance :
l Equipment that is considered valid must meet the following requirements:
l Specifications and functions of the machine match the content of this contract.
l Electrical, mechanical and control systems run smoothly.
l Run out sample products as required.
l Must have a certificate of quality of the place of production and documents attached to the machine.
ARTICLE 2: PAYMENT METHOD
v The buyer makes payment to the seller in 02 times by transfer to the seller's account.
v First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.
v 2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer (IF YES). The seller will send a notice of delivery to the buyer.
ARTICLE 3: WARRANTY
Warranty period: within 12 months from the acceptance date of the equipment.
During the warranty period, if the equipment is defective by the manufacturer of the Seller, the Seller is responsible for the presence at the purchaser factory within 48 hours of being notified to repair the equipment. All costs incurred will be borne by the Seller.
(If the device is faulty by the user or is affected by unintended issues such as
Unstable electrical lines, collisions, natural disasters, unclean hygiene, the purchaser must be fully responsible for paying for repair and other replacement expenses)
ARTICLE 4: BUYER'S LIABILITY
6.1 Provide auxiliary systems and handover surface installation equipment. The auxiliary systems include: supply of supplies and preparation of 3 Phase 220V / 50Hz power supply systems for electrical appliances including switches, sockets, power wires, Electric three-phase electric switches, electric lines, steam-lines, gas lines, gas valves, pipes, elbows,
The buyer is responsible for dropping the item at the buyer's address to the correct location
6.2 The purchaser shall be responsible for sending the representative to receive the goods and taking over the test when the equipment has been installed and the instruction manual is used.
6.3 The buyer pays the seller under Article 4 of this contract.
6.4 The expenses such as other expenses for foreign engineers in china will be paid by the Seller.
6.5 The Other expenses such as airplane, visa, travel expenses and dining, hotel for technical will be charged by the buyer,the buyer will be pay for the engineer 120USD each day .
ARTICLE 5: SELLER'S LIABILITY
7.1 Commitment to deliver the equipment to the purchaser in accordance with the type and design of this contract.
7.2 Vendors undertake:
Asian. Ensure time and progress of equipment handover
B. Assurance of quality and content in accordance with agreement requirements.
C. Vendors nominate technical staff to assist, install and guide the buyer to operate and use the equipment well when installing the machine.
点击右上角
分享给朋友吧
© 2025 GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD all rights reserved
Contact us
GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD
Telephone: 020-38912384
Email :
Sales@champion-automation.com
Fax: 020-38912463
Tel: 0086-18816899059, 15018408881
Add:Room 2116,No 101-1 ,Li Xin 12th street, Xin Tang Town, Zeng Cheng District, Guang Zhou, Guang Dong province, China
