MR ALADDIN : 18816899059@163.com
MR AU: auvuchi@163.com
0086-18816899059
0086-15018408881
QUOTATION OF EXTRUSION BLOW MOLDING MACHINE OG-90E
1.MACHINE PHOTO
（The photo is only for reference）
2.Production system of automatic high speed blow molding machine:
2.1 Automatic high speed blow molding machine
| ModeL | Series of OG-90 |
| The blow molding machine model OG-90 can produce bottle, kettle, can, bucket etc. The machine is especially designed for producing with material such as PE, PP etc. The product capacity can reach 150 cycles per hour (idle circle). | |
| Die head | Accumulator |
| Extrusion system | Imported automatic temperature controlling device. |
| Clamping device | Bi-directional synchronous clamping device with single double-axis cylinder. |
| Hydraulic system | The whole hydraulic system adopts imported servo motor energy-saving system which can save almost 50% power consumption. |
| Electric controlling system | Adopt imported touch screen + PLC. Every electric component is in famous brand. |
Enclosure:
1. Technical data and parts instructions of blow molding machine for series of OG-90
| Model | OG-90E | |
| Max. volume of products (L) | 80 (according to product design) | |
| Extrusion system | ||
| Screw diameter（mm） | φ90 | |
| L/D | 25:1 | |
| Screw rotation speed (rev./min.) | 10-80 | |
| Plasticizing capacity（kg/h） | 150(HDPE) | |
| Barrel heating zone quantity (pcs) | 4 | |
| Barrel heating power (KW) | 25 | |
| Extrusion motor power (KW) | 45 | |
| Die head system | ||
| Max. accumulator volume (L) | 6 | |
| Max. ejection speed (kg/sec.) | 1 | |
| Max diameter of die (mm) | 350 | |
| Die head heating quantity (pcs) | 4 | |
| Die head heating power (KW) | 22 | |
| Clamping system | ||
| Platen dimension（W×H）（mm） | 900×800 | |
| Platen opening stroke（mm） | 450～1100 | |
| Max clamping force（KN） | 350 | |
| Bottom blowing system (optional) | ||
| Spreading stroke (mm) | 140-420 | |
| Blow pin up and down stroke (mm) | 150 | |
| Bottom blow up and down stroke (mm) | 250 | |
| Frame | ||
| Lifting stroke (mm) | 350 | |
| Lifting speed (mm/min.) | 30 | |
| Hydraulic system | ||
| Hydraulic system pressure（Mpa） | Small pump | without small pump when using servo system |
| Big pump | 14 | |
| Servo oil pump motor power (KW) | 18.5 | |
| Parison thickness controller hydraulic servo system (optional) | ||
| Rated pressure (Mpa) | 14 | |
| Rated flow (L/min.) | 23 | |
| Motor power of parison thickness（kW） | 4 | |
| Pneumatic system | ||
| Air source pressure (Mpa) | 0.7 | |
| Working pressure (Mpa) | 0.6 | |
| Air consumption (M3 / min.) | 0.4 | |
| Water source | ||
| Pressure of water supply (Mpa) | 0.3 | |
| Power source | ||
| Voltage | AC380V±10% | |
| Frequency | 50HZ | |
| Wiring system | Three phase four wires | |
| Total rated power (KW) | 116 | |
| Average consumption (KW/H) | 48 | |
| Machine weight（T） | 13 | |
| Machine dimension（LxWxH）m | 5.1x2.9x4.9 | |
2. Components
| Item | Technology content |
| Hydraulic system | |
| Oil pump | Servo oil pump: SUMITOMO (Japan) |
| Hydraulic valve | YUKEN (Japan) |
| Oil motor | Servo oil motor: PHASE (Italy) |
| Proportional valve | HNC (Taiwan) |
| Servo valve | MOOG (Japan) |
| Oil-way pressure control | Proportion pressure control |
| Seal part | DZ (Taiwan) / NOK (Japan) |
| Electronic system | |
| PLC | PANASONIC (Japan) |
| Touch screen | INOVANCE (China) |
| Frequency converter | RBCA 罗宾康 |
| Contactor | SCHNEIDER (France) |
| Relay | OMRON (Japan) |
| Proximity switch | SCHNEIDER (France) |
| Electric ruler | GEFRAN (Italy) |
| Light curtain sensor | SENSORC (China) |
| Thickness servo control | MOOG (Japan) |
| Air switch | SCHNEIDER (France) |
| Solid relay | CRYDOM (USA) |
| Motor | SIMO (China) |
| Clamping system | |
| Form | Direct hydraulic clamping, two-way synchronization mechanism |
| Driving form | Differential motion quick clamping, two-rod structure, large space for mold |
| Die head system | |
| Die head structure | Accumulator type |
| Runner form | first-in first-out |
| Material of main runner part | 38CrMoAlA；42CrMo |
| Extrusion system | |
| Driving form | Frequency control |
| Material of barrel and screw | 38CrMoAlA |
| Heater | Casting-aluminum heating device |
| Pneumatic system | |
| Main air valve | AIRTAC (Taiwan) / EMC |
| Take out system (optional) | |
| Air cylinder | EMC |
点击右上角
分享给朋友吧
© 2025 GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD all rights reserved
Contact us
GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD
Telephone: 020-38912384
Email :
Sales@champion-automation.com
Fax: 020-38912463
Tel: 0086-18816899059, 15018408881
Add:Room 2116,No 101-1 ,Li Xin 12th street, Xin Tang Town, Zeng Cheng District, Guang Zhou, Guang Dong province, China
