SJ65 PP Profile Machine

Screw

1.Screw diameter : 65mm

2.The length and diameter ratio of screw : 30:1

3.Material of screw: 38CrMoALA ,under nitrogen treatment

4.The depth of nitrogen layer of screw: 0.4-0.6mm,hardness: HV>740

Barrel

1.The material of barrel: 38CrMoALA,under nitrogen treatment

2.The depth of nitrogen layer of barrel : 0.5-0.7mm,hardness: HV>940

3.Barrel heating : 5 heating section ,

Material of heating circle :cast aluminum, heating power:4kw*5 sections

4.Barrel cooling:4 cooling section, cooling power:0.12kw*5sections(fan blower )

Motor

Driving motor power :18.5kw

The capacity of extruder

60-70kg/h

Reduction gearbox

Speed reducer is hard tooth surface, and material of gear is 20CrMoTi under nitrogen, quenching and grinding treatment, and also equipped with outer cooling device.

The device has strong loading capacity, stable transmission, low noise and high efficiency, etc.

Vacuum

Vacuum pump power : 3kw

Pump

Water pump power : 3 kw

The travel of auto pushing pole

50mm

Adjustment mode

Three dimension adjusted by bolts

Material of nozzle

Brass

Material of surface stand

Stainless steel

The length of sizing stand

6000mm

Power of dry device

0.75kw

Clamping length:

1000mm

Drive electrical power:

0.75kw×2 and frequency control

Max traction speed:

5m/min 

Power of cutting motor:

1.5kw

Clamping mode:

pneumatic clamping

Replacement mode:

pneumatic

Dimension

1000*900*1600mm

Counting device

Set length of cutting profile, automaticly.

length:

6000mm

Discharging mode:

pneumatic reversal

Available air-compression pressure

0.3-0.8Mpa