在线询盘
Hơn+
Tư vấn sản phẩm：
Bạn chưa thêm bất kỳ sản phẩm nào!
máy ép nhựa 120-300T injeciton machine 120-300T
Được thảo luận
产品详情
Machine Model
| QTY(SET) | Unit price(USD) | Amount (USD) |
Injection Moulding Machine Máy ép nhựa BL120EKH/C360 Standard B Screw and barrel, Dia. =36mm BOLE standard fixing hole platen One core Đường kính trục vít loại B 36mm Tấm kìm lỗ tiêu chuẩn Rut tim（tấm khuông động) | 1 | ||
Injection Moulding Machine Máy ép nhựa BL160EKH/C490 Standard B Screw with chrome coating , Dia. =40mm BOLE standard fixing hole platen One core Đường kính trục vít loại B 40 mm Tấm kìm lỗ tiêu chuẩn Rut tim（tấm khuông động) | 1 | ||
Injection Moulding Machine Máy ép nhựa BL170EKH/C660 Standard B Screw and barrel, Dia. =45mm BOLE standard fixing hole platen One core Đường kính trục vít loại B 45 mm Tấm kìm lỗ tiêu chuẩn Rut tim（tấm khuông động) | 1 | ||
Injection Moulding Machine Máy ép nhựa BL200EKH/C700 Standard B Screw with chrome coating , Dia. =45mm BOLE standard fixing hole platen One core Đường kính trục vít loại B 45 mm Tấm kìm lỗ tiêu chuẩn Rut tim（tấm khuông động) | 1 | ||
Injection Moulding Machine Máy ép nhựa BL230EKH/C910 Standard B Screw and barrel, Dia. =50mm BOLE standard fixing hole platen One core Đường kính trục vít loại B 50 mm Tấm kìm lỗ tiêu chuẩn Rut tim（tấm khuông động) | 1 | ||
Injection Moulding Machine Máy ép nhựa BL300EKH/C1600 Standard B Screw and barrel, Dia. =60mm BOLE standard fixing hole platen Two core Đường kính trục vít loại B 60 mm Tấm kìm lỗ tiêu chuẩn Rut tim（tấm khuông động) | 1 | ||
Container | 120EKH:20GP 160EKH:20GP 170EKH:20GP 200EKH:20GP 230EKH:20GP 300EKH:40HQ | ||
DESCRIPTION | UNIT | BL120EKH/C360 | |||
螺杆直径Crew diam
eter | A | B | C | D | |
Mm | 32 | 36 | 40 | 45 | |
长径比Screw ratio | 23 | 22 | 20 | 18 | |
理论注塑容量Theoretical injection capacity | cm3 | 153 | 193 | 239 | 302 |
注射重量(PS)Shot weight(PS) | g | 141 | 178 | 220 | 278 |
Oz | 5.0 | 6.3 | 7.8 | 9.8 | |
最大对空注射速率Max. Injection rate into Air | cm3/s | 96 | 122 | 150 | 190 |
最大对空注射速率(PS)Max. Injection rate into Air | g/s | 87 | 111 | 137 | 173 |
注射压力Injection pressure | bar | 239 | 189 | 153 | 121 |
理论塑化速度 (PS)Theoretical plasticizing speed | g/s | 11 | 14 | 19 | 27 |
注射行程Injection stroke | mm | 190 | |||
最大注射速度Max. Injection speed | mm/s | 119 | |||
最大螺杆转速Max. Screw speed | r/min | 221 | |||
锁模力Clamping force | KN | 1200 | |||
开模行程Opening stroke | mm | 360 | |||
拉杆间距Space between tie bar（L×H） | mm×mm | 405×335 | |||
最小模厚(T-型槽)Min. mould height(T-slot) | mm | 160 | |||
最大模厚(T-型槽)Max. mould height(T-slot) | mm | 430 | |||
最大模板距离Max. distance Platen(T-slot) | mm | 790 | |||
顶出行程Ejector stroke | mm | 120 | |||
顶出力Ejector force forward | KN | 34 | |||
顶出回缩力Ejector force back | KN | 22 | |||
顶针数Number of ejector bar | PC | 5 | |||
系统压力System Pressure | Mpa | 17.5 | |||
电机总功率 Pump Motor（Min~Max） | KW | 8.9~15 | |||
电机数量Number of Motor | Pcs | 1 | |||
电热功率Heater power | KW | 6.8 | |||
温控区数Number of temp. control zones | 3+1 | ||||
干循环时间Dry cycle time | S | 3.1 | |||
料斗容量Hopper capacity | Kg | 25 | |||
油箱容量Oil tank capacity | L | 150 | |||
机器重量Machine Weight | ton | 3.3 | |||
机器外形 (L*W*H)Machine dimensions (L*W*H) | m×m×m | 4.4*1.3*2.1 | |||
DESCRIPTION | UNIT | BL160EKH/C490 | |||
螺杆直径crew diameter | A | B | C | D | |
Mm | 36 | 40 | 45 | 50 | |
长径比Screw ratio | 23 | 23 | 21 | 18 | |
理论注塑容量Theoretical injection capacity | cm3 | 214 | 264 | 334 | 412 |
注射重量(PS)Shot weight(PS) | g | 197 | 243 | 307 | 379 |
Oz | 6.9 | 8.6 | 10.9 | 13.4 | |
最大对空注射速率Max. Injection rate into Air | cm3/s | 127 | 156 | 198 | 244 |
最大对空注射速率(PS)Max. Injection rate into Air | g/s | 115 | 142 | 180 | 222 |
注射压力Injection pressure | bar | 230 | 186 | 147 | 119 |
理论塑化速度 (PS)Theoretical plasticizing speed | g/s | 16 | 21 | 29 | 38 |
注射行程Injection stroke | mm | 210 | |||
最大注射速度Max. Injection speed | mm/s | 125 | |||
最大螺杆转速Max. Screw speed | r/min | 240 | |||
锁模力Clamping force | KN | 1600 | |||
开模行程Opening stroke | mm | 420 | |||
拉杆间距Space between tie bar（水平×垂直） | mm×mm | 455×405 | |||
最小模厚(T-型槽)Min. mould height(T-slot) | mm | 180（145） | |||
最大模厚(T-型槽)Max. mould height(T-slot) | mm | 500（500） | |||
最大模板距离Max. distance Platen(T-slot) | mm | 920（920） | |||
顶出行程Ejector stroke | mm | 140 | |||
顶出力Ejector force forward | KN | 49 | |||
顶出回缩力Ejector force back | KN | 37 | |||
顶针数Number of ejector bar | PC | 5 | |||
系统压力System Pressure | Mpa | 17.5 | |||
电机总功率 Pump Motor（Min~Max） | KW | 13.4~18.7 | |||
电机数量Number of Motor | Pcs | 1 | |||
电热功率Heater power | KW | 9.5 | |||
温控区数Number of temp. control zones | 3+1 | ||||
干循环时间Dry cycle time | S | 2.4 | |||
料斗容量Hopper capacity | Kg | 25 | |||
油箱容量Oil tank capacity | L | 165 | |||
机器重量Machine Weight | ton | 4 | |||
机器外形 (L*W*H)Machine dimensions (L*W*H) | m×m×m | 4.9*1.4*2.1 | |||
DESCRIPTION | UNIT | BL170EKH/C660 | ||
螺杆直径Crew diam
eter | A | B | C | |
Mm | 40 | 45 | 50 | |
长径比Screw ratio | 22.5 | 20.0 | 18 | |
理论注塑容量Theoretical injection capacity | cm3 | 283 | 385 | 442 |
注射重量(PS)Shot weight(PS) | g | 260 | 329 | 406 |
Oz | 9.2 | 11.6 | 14.4 | |
最大对空注射速率Max. Injection rate into Air | cm3/s | 131 | 165 | 204 |
最大对空注射速率(PS)Max. Injection rate into Air | g/s | 119 | 150 | 186 |
注射压力Injection pressure | bar | 235 | 185 | 150 |
理论塑化速度 (PS)Theoretical plasticizing speed | g/s | 18 | 25 | 33 |
注射行程Injection stroke | mm | 225 | ||
最大注射速度Max. Injection speed | mm/s | 104 | ||
最大螺杆转速Max. Screw speed | r/min | 210 | ||
锁模力Clamping force | KN | 2000 | ||
开模行程Opening stroke | mm | 480 | ||
拉杆间距Space between tie bar（L×H） | mm×mm | 505×455 | ||
最小模厚(T-型槽)Min. mould height(T-slot) | mm | 200 | ||
最大模厚(T-型槽)Max. mould height(T-slot) | mm | 530 | ||
最大模板距离Max. distance Platen(T-slot) | mm | 1010 | ||
顶出行程Ejector stroke | mm | 150 | ||
顶出力Ejector force forward | KN | 49 | ||
顶出回缩力Ejector force back | KN | 37 | ||
顶针数Number of ejector bar | PC | 5 | ||
系统压力System Pressure | Mpa | 17.5 | ||
电机总功率 Pump Motor（Min~Max） | KW | 16.4~23 | ||
电机数量Number of Motor | Pcs | 1 | ||
电热功率Heater power | KW | 12.2 | ||
温控区数Number of temp. control zones | 3+1 | |||
干循环时间Dry cycle time | S | 2.5 | ||
料斗容量Hopper capacity | Kg | 25 | ||
油箱容量Oil tank capacity | L | 230 | ||
机器重量Machine Weight | ton | 3.3 | ||
机器外形 (L*W*H)Machine dimensions (L*W*H) | m×m×m | 5.2*1.4*2.2 | ||
DESCRIPTION | UNIT | BL200EKH/C700 | |||
螺杆直径crew diameter | A | B | C | D | |
Mm | 40 | 45 | 50 | 55 | |
长径比Screw ratio | 23 | 21 | 19 | 17 | |
理论注塑容量Theoretical injection capacity | cm3 | 301 | 382 | 471 | 570 |
注射重量(PS)Shot weight(PS) | g | 277 | 351 | 433 | 524 |
Oz | 9.8 | 12.4 | 15.3 | 18.5 | |
最大对空注射速率Max. Injection rate into Air | cm3/s | 155 | 197 | 243 | 294 |
最大对空注射速率(PS)Max. Injection rate into Air | g/s | 141 | 179 | 221 | 267 |
注射压力Injection pressure | Mpa | 235 | 185 | 150 | 124 |
理论塑化速度 (PS)Theoretical plasticizing speed | g/s | 18 | 25 | 33 | 41 |
注射行程Injection stroke | mm | 240 | |||
最大注射速度Max. Injection speed | mm/s | 124 | |||
最大螺杆转速Max. Screw speed | r/min | 210 | |||
锁模力Clamping force | KN | 2000 | |||
开模行程Opening stroke | mm | 480 | |||
开模行程Space between tie bar（水平×垂直） | mm×mm | 505×455 | |||
最小模厚(T-型槽)Min. mould height(T-slot) | mm | 200（165） | |||
最大模厚(T-型槽)Max. mould height(T-slot) | mm | 530（530） | |||
最大模板距离(T-型槽)Max. distance Platen(T-slot) | mm | 1010（1010） | |||
顶出行程Ejector stroke | mm | 150 | |||
顶出力Ejector force forward | KN | 49 | |||
顶出回缩力Ejector force back | KN | 37 | |||
顶针数Number of ejector bar | PC | 5 | |||
系统压力System Pressure | Mpa | 17.5 | |||
电机功率Pump Motor (Min~Max) | KW | 16.4~23 | |||
电机数量Number of Motor | 1 | ||||
电热功率Heater power | KW | 12.7 | |||
温控区数Number of temp. control zones | 3+1 | ||||
干循环时间Dry cycle time | S | 2.5 | |||
料斗容量Hopper capacity | Kg | 25 | |||
油箱容量Oil tank capacity | L | 230 | |||
机器重量Machine Weight | ton | 5.5 | |||
机器外形 (L*W*H)Machine dimensions (L*W*H) | m×m×m | 5.2×1.4×2.2 | |||
DESCRIPTION | UNIT | BL230EKH/C910 | ||
螺杆直径crew diameter | A | B | C | |
Mm | 45 | 50 | 55 | |
长径比Screw ratio | 23 | 21 | 19.1 | |
理论注塑容量Theoretical injection capacity | cm3 | 397 | 491 | 594 |
注射重量(PS)Shot weight(PS) | g | 366 | 451 | 546 |
Oz | 12.9 | 15.9 | 19.3 | |
最大对空注射速率Max. Injection rate into Air | cm3/s | 168 | 207 | 251 |
最大对空注射速率(PS)Max. Injection rate into Air | g/s | 153 | 189 | 228 |
注射压力Injection pressure | bar | 230 | 186 | 154 |
理论塑化速度 (PS)Theoretical plasticizing speed | g/s | 27 | 35 | 43 |
注射行程Injection stroke | mm | 250 | ||
最大注射速度Max. Injection speed | mm/s | 106 | ||
最大螺杆转速Max. Screw speed | r/min | 221 | ||
锁模力Clamping force | KN | 2500 | ||
开模行程Opening stroke | mm | 530 | ||
拉杆间距Space between tie bar（水平×垂直） | mm×mm | 555×505 | ||
最小模厚(T-型槽)Min. mould height(T-slot) | mm | 220（175） | ||
最大模厚(T-型槽)Max. mould height(T-slot) | mm | 570（570） | ||
最大模板距离Max. distance Platen(T-slot) | mm | 1100(1100) | ||
顶出行程Ejector stroke | mm | 150 | ||
顶出力Ejector force forward | KN | 67 | ||
顶出回缩力Ejector force back | KN | 39 | ||
顶针数Number of ejector bar | PC | 9 | ||
系统压力System Pressure | Mpa | 17.5 | ||
电机总功率 Pump Motor（Min~Max） | KW | 20.5~27.8 | ||
电机数量Number of Motor | Pcs | 1 | ||
电热功率Heater power | KW | 13.72 | ||
温控区数Number of temp.control zones
温控区数Number of temp. control zones | 4+1 | |||
干循环时间Dry cycle time | S | 3.3 | ||
料斗容量Hopper capacity | Kg | 50 | ||
油箱容量Oil tank capacity | L | 280 | ||
机器重量Machine Weight | ton | 7 | ||
机器外形 (L*W*H)Machine dimensions (L*W*H) | m×m×m | 5.7*1.5*2.4 | ||
DESCRIPTION | UNIT | BL300EKH/C1600 | |||
螺杆直径crew diameter | A | B | C | D | |
Mm | 55 | 60 | 65 | 70 | |
长径比Screw ratio | 23 | 23 | 21 | 20 | |
理论注塑容量Theoretical injection capacity | cm3 | 748 | 890 | 1045 | 1212 |
注射重量(PS)Shot weight(PS) | g | 688 | 819 | 961 | 1115 |
Oz | 24.3 | 28.9 | 34.0 | 39.4 | |
最大对空注射速率Max. Injection rate into Air | cm3/s | 267 | 317 | 373 | 432 |
最大对空注射速率(PS)Max. Injection rate into Air | g/s | 243 | 289 | 339 | 393 |
注射压力Injection pressure | bar | 219 | 184 | 157 | 135 |
理论塑化速度 (PS)Theoretical plasticizing speed | g/s | 41 | 55 | 69 | 84 |
注射行程Injection stroke | mm | 315 | |||
最大注射速度Max. Injection speed | mm/s | 112 | |||
最大螺杆转速Max. Screw speed | r/min | 210 | |||
锁模力Clamping force | KN | 3000 | |||
开模行程Opening stroke | mm | 590 | |||
拉杆间距Space between tie bar（水平×垂直） | mm×mm | 655×605 | |||
最小模厚(T-型槽)Min. mould height(T-slot) | mm | 250（205） | |||
最大模厚(T-型槽)Max. mould height(T-slot) | mm | 660（660） | |||
最大模板距离Max. distance Platen(T-slot) | mm | 1250（1250） | |||
顶出行程Ejector stroke | mm | 190 | |||
顶出力Ejector force forward | KN | 67 | |||
顶出回缩力Ejector force back | KN | 39 | |||
顶针数Number of ejector bar | PC | 13 | |||
系统压力System Pressure | Mpa | 17.5 | |||
电机总功率 Pump Motor（Min~Max） | KW | 26.7~36.5 | |||
电机数量Number of Motor | Pcs | 1 | |||
电热功率Heater power | KW | 19.55 | |||
温控区数Number of temp. control zones | 4+1 | ||||
干循环时间Dry cycle time | S | 2.8 | |||
料斗容量Hopper capacity | Kg | 50 | |||
油箱容量Oil tank capacity | L | 350 | |||
机器重量Machine Weight | ton | 9 | |||
机器外形 (L*W*H)Machine dimensions (L*W*H) | m×m×m | 6.3*1.7*2.5 | |||
5.FREE-SPARE PARTS
Part name | Qty. |
Fixed wrench | 1 PCS |
Balance Pad | 1 SET |
Clamping Cap (plane) | 1 SET |
Clamping Cap (cambered) | 1 SET |
Tool Box | 1 PCS |
Extended Nozzle | 1 SET |
Extended Nozzle Heater | 2 PCS |
Core Pulling Oil Pipe | 1 SET |
Cylinder Rod Seal | 1 SET |
Cylinder “O” Ring | 1 SET |
Stroke Switch | 1 PCS |
Proximity Switch | 1 PCS |
Nozzle Heater | 5 PCS |
Nozzle Thermocouple | 1 PCS |
Heater | 1 SET |
Lubrication Accessories | 1 PACK |
Lubrication Pipe | 1 PCS |
Solid State Relay | 1 PCS |
AC Contactor | 1 PCS |
MAIN-PARTS LINH KIỆN MÁY
PARTS NAME | BRANDS | COUNTRY OF BRAND |
Computer / vi tính điều khiển | EST | China |
Servo motor | INOVANCE | CHINA |
Servo driver bộ driver | INOVANCE | CHINA |
Automatic air switch công tắc | LS | KOREA |
A.C. contact công tắc | LS | KOREA |
Miniature circuit breaker/ bộ phanh | LS | KOREA |
Electronic ruler thước điện tử | OPKOK | GERMANY |
Solid-state relay con khống chế nhiệt | THE | CHINA |
Safety relay an toàn | PHOENIX | GERMANY |
Limit switch công tắc hành trình hạn chế | OMRON | JAPAN |
Proximity switch công tắc di chuyển | SONON | CHINA |
OIL PUMP bơm dầu | HYTEK | CHINA |
Plasticizing motor motor đùn | STF | CHINA |
Adjusting mold motor motor chỉnh khuôn | EATON | USA |
Sealing element vòng cao su | HALLITE/NOK/PARKER | U.K./JAPAN/USA |
Direction valve van trực tiếp | Tokyo keiki | JAPAN |
Hydraulic relief valve van thủy lực | NHC | GERMANY |
Proportional valve van tỷ lệ | NHC | GERMANY |
Lubrication oil pump bơm dầu bôi trơn | HERG | JAPAN |
High-pressure Oil Hose đầu dầu cao áp | MANULI/ALFAGOMMA /GOODYEAR/CONTINENTALS | ITALY/USA |
Pressure gauge áp lực kiểm tra | TECSIS | GERMANY |
Cooler bộ heo làm mát | HEMING/BAIYI | CHINA |
▲BOLE machinery keep the right of brand adjusting and improving without further notice. | ||
Sao chép liên kết sản phẩm
Nhấn và giữ hình ảnh để lưu / chia sẻ
sự điều tra
Đã tham gia thành công
