Production system of automatic high speed blow molding machin

Automatic high speed blow molding machine

ModeL	Series of OG-HC80
The blow molding machine model OG-HC80 can produce bottle, kettle, can, bucket etc. The machine is especially designed for producing with material such as PE, PP etc. The product capacity can reach 120-150 cycles per hour (idle circle).
Die head	Accumulator
Extrusion system	Imported automatic temperature controlling device.
Clamping device	Bi-directional synchronous clamping device with single double-axis cylinder.
Hydraulic system	The whole hydraulic system adopts imported servo motor energy-saving system which can save almost 50% power consumption.
Electric controlling system	Adopt imported touch screen + PLC. Every electric component is in famous brand.

EXTRUSION BLOW MOLDING MACHINE OG-HC80

 

 1.MACHINE PHOTO

（The photo is only for reference）

 

 (including one series of spare parts)

NO.	Name	Spec.	Quantity (SET)
Main machine
1	OG-HC80 blow molding machine	Frequency converting control of feeding, 4.2L accumulator	1
2	Parison thickness controller	MOOG 100 points (Japan)	1
3	Take out device	Robot	1
4	Bottom blowing device	With bottom seal function	1
5	Servo motor energy-saving system	Italy PHASE SERVO MOTOR power:18.5KW	1
6	Packing	Wooden panel with fumigation	1
7	Blowing Mold	50-60L	1
Note:
1)    Customer Voltage and Frequency: 380V/50HZ, 3 Phase
2)    Appendix 1: technical data; appendix 2: components brand list

 

 

 

Enclosure:

1. Technical data and parts instructions of blow molding machine for series of  OG-HC80

Model		OG-HC80
Max. volume of products (L)		25
Screw diameter（mm）		φ80
L/D		25:1
Plasticizing capacity（KG/H）		100
Platen dimension（W×H）（mm）		750×650
Platen opening stroke（mm）		250～800
Mould thickness（mm）		270～450
Max clamping force（KN）		240
Accumulator volume（L）		4.2
Max diameter of die（mm）		250
Hydraulic system pressure（Mpa）	Small pump	without small pump when using servo system
	Big pump	14
Heating power of die（KW）		18
Heating power of extrusion（KW）		18
Motor power of hydraulic servo pump（KW）		18.5
Motor power of parison thickness（KW）		4
Driving power（KW）		30
Total rated power（KW）		82.5
Average consumption（KW/H）		40.5
Machine weight（T）		11
Machine dimension（LxWxH）m		4.5x2.5x3.8

 

 

2. Components

Item	Technology content
Hydraulic system
Oil pump	Servo oil pump: SUMITOMO (Japan)
Hydraulic valve	YUKEN (Japan)
Oil motor	Servo oil motor: PHASE (Italy)
Proportional valve	HNC (Taiwan)
Servo valve	MOOG (Japan)
Oil-way pressure control	Proportion pressure control
Seal part	DZ (Taiwan) / NOK (Japan)
Electronic system
PLC	PANASONIC (Japan)
Touch screen	INOVANCE (China)
Frequency converter	RBCA
Contactor	SCHNEIDER (France)
Relay	OMRON (Japan)
Proximity switch	SCHNEIDER (France)
Electric ruler	GEFRAN (Italy)
Light curtain sensor	SENSORC (China)
Thickness servo control	MOOG (Japan)
Air switch	SCHNEIDER (France)
Solid relay	CRYDOM (USA)
Motor	SIMO (China)
Clamping system
Form	Direct hydraulic clamping, two-way synchronization mechanism
Driving form	Differential motion quick clamping, two-rod structure, large space for mold
Die head system
Die head structure	Accumulator type
Runner form	first-in first-out
Material of main runner part	38CrMoAlA；42CrMo
Extrusion system
Driving form	Frequency control
Material of barrel and screw	38CrMoAlA
Heater	Casting-aluminum heating device
Pneumatic system
Main air valve	AIRTAC (Taiwan) / EMC
Take out system
Air cylinder	EMC
Mold sample

 

 

 

FOB China.

- Delivery time: The Seller will hand over the goods to the buyer after 60 business days, excluding Saturdays, Sundays and public holidays (1-5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment

- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install

 

Set up :

- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.

Acceptance :

l  Equipment that is considered valid must meet the following requirements:

l   Specifications and functions of the machine match the content of this contract.

l   Electrical, mechanical and control systems run smoothly.

l   Run out sample products as required.

l   Must have a certificate of quality of the place of production and documents attached to the machine.

ARTICLE 2: PAYMENT METHOD

v The buyer makes payment to the seller in 02 times by transfer to the seller's account.

v  First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.

v  2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer (IF YES). The seller will send a notice of delivery to the buyer.

ARTICLE 3: WARRANTY

Warranty period: within 12 months from the acceptance date of the equipment.

During the warranty period, if the equipment is defective by the manufacturer of the Seller, the Seller is responsible for the presence at the purchaser factory within 48 hours of being notified to repair the equipment. All costs incurred will be borne by the Seller.

(If the device is faulty by the user or is affected by unintended issues such as

Unstable electrical lines, collisions, natural disasters, unclean hygiene, the purchaser must be fully responsible for paying for repair and other replacement expenses)

 

ARTICLE 4: BUYER'S LIABILITY

1 Provide auxiliary systems and handover surface installation equipment. The auxiliary systems include: supply of supplies and preparation of 3 Phase 220V / 50Hz power supply systems for electrical appliances including switches, sockets, power wires, Electric three-phase electric switches, electric lines, steam-lines, gas lines, gas valves, pipes, elbows,

The buyer is responsible for dropping the item at the buyer's address to the correct location

2 The purchaser shall be responsible for sending the representative to receive the goods and taking over the test when the equipment has been installed and the instruction manual is used.

3 The buyer pays the seller under Article 4 of this contract.

4 The expenses such as other expenses for foreign engineers in china will be paid by the Seller.

5 The Other expenses such as airplane, visa, travel expenses and dining, hotel for technical will be charged by the buyer,the buyer will be pay for the engineer 200USD each day .

 

ARTICLE 5: SELLER'S LIABILITY

1 Commitment to deliver the equipment to the purchaser in accordance with the type and design of this contract.

2 Vendors undertake:

Asian. Ensure time and progress of equipment handover

B. Assurance of quality and content in accordance with agreement requirements.

C. Vendors nominate technical staff to assist, install and guide the buyer to operate and use the equipment well when installing the machine.