OG-HH90E
1.MACHINE PHOTO
（The photo is only for reference）
Enclosure:
1. Technical data and parts instructions of blow molding machine for series of OG-HH90E
Model | OG-HH90E | |
Max. volume of products(L) | 80 (according to product design) | |
Extrusion system | ||
Screw diameter（mm） | φ90 | |
L/D | 25:1 | |
Screw rotation speed (rev./min.) | 10-80 | |
Plasticizing capacity（kg/h） | 150(HDPE) | |
Barrel heating zone quantity (pcs) | 4 | |
Barrel heating power (KW) | 25 | |
Extrusion motor power (KW) | 45 | |
Die head system | ||
Max. accumulator volume (L) | 6 | |
Max. ejection speed (kg/sec.) | 1 | |
Max diameter of die (mm) | 350 | |
Die head heating quantity (pcs) | 4 | |
Die head heating power (KW) | 22 | |
Clamping system | ||
Platen dimension（W×H）（mm） | 900×800 | |
Platen opening stroke（mm） | 450～1100 | |
Max clamping force（KN） | 350 | |
Bottom blowing system (optional) | ||
Spreading stroke (mm) | 140-420 | |
Blow pin up and down stroke (mm) | 150 | |
Bottom blow up and down stroke (mm) | 250 | |
Frame | ||
Lifting stroke (mm) | 350 | |
Lifting speed (mm/min.) | 30 | |
Hydraulic system | ||
Hydraulic system pressure（Mpa） | Small pump | without small pump when using servo system |
Big pump | 14 | |
Servo oil pump motor power (KW) | 18.5 | |
Parison thickness controller hydraulic servo system (optional) | ||
Rated pressure (Mpa) | 14 | |
Rated flow (L/min.) | 23 | |
Motor power of parison thickness（kW） | 4 | |
Pneumatic system | ||
Air source pressure (Mpa) | 0.7 | |
Working pre | ||
