MR ALADDIN : 18816899059@163.com
MR AU: auvuchi@163.com
0086-18816899059
0086-15018408881
OG-LX120 Plastic cup rim roller machine+counting machine+Stacking machine
Interview
Product Detail
OG-LX120 Plastic cup rim roller machine+counting machine+Stacking machine
Motor | Capacity(pcs/hr) | Caliber | Stacking | Height | Dimension | Weight |
Power | Channel | |||||
1.5(KW) | 20000-30000 | 60~85(mm) | 13 | 75~180(mm) | 3.9×1.4×1.05(m) | 800(kg) |
75~95(mm) | 12 | |||||
95~105(mm) | 11 | |||||
105~115(mm) | 10 |
1,设备技术参数Technical Specification
序号 No | 明细 Detail description | 参数 Parameter | 备注 Remark |
1 | 调速方式 Speed control | 变频调速 By inverter | |
2 | 适用塑杯材料 Cup material suitable | 圆口PP/PS/PET/PLA Round cup PP/PS/PET/PLA | |
3 | 适用塑杯口径 Cup diameter suitable | 50-120mm 50-120mm | |
4 | 输入电源 Power input | 380V/50Hz 380V/50Hz | 三相 three phase |
5 | 卷边速度 Speed | ≤800个/分钟 ≤800 pcs/min. | 材料不同，速度不同 Different material with different speed |
6 | 整机功率 Total power | 13KW 13KW | |
7 | 耗气量 Air consumption | 0.5立方米/分钟 0.5 cubic meter/min. | |
8 | 外形尺寸（长/宽/高） Dimension （L/W/H） | 2000×400×980mm 2000×400×980mm | 输送段 Transport part |
9 | 外形尺寸（长/宽/高） Dimension （L/W/H） | 1030×800×1300mm 1030×800×1300mm | 主机 Rim roller part |
10 | 外形尺寸（长/宽/高） Dimension （L/W/H） | 2900×400×1500mm 2900×400×1500mm | 数杯机 Counting part |
11 | 重量 Weight | 约800公斤 Around 800kg |
主要电器件Main electrical components
序号 | 品名 | 单位 | 数量 |
1 | 台达变频器 1.5KW DELTA inverter 1.5KW | 套 set | 1 |
2 | 数杯控制器 Cup counting controller | 只 piece | 1 |
3 | 输送皮带 Transport belt | 条 piece | 4 |
4 | 阳明固态40A配散热座 TAIWAN SSR 40A with cooling base | 套 set | 7 |
5 | 亚太温控表 YATAI temperature controller | 个 piece | 4 |
6 | 施耐德按钮（绿色NO） SCHNEIDER switch(green color NO) | 个 piece | 1 |
7 | 施耐德按钮（绿色NC） SCHNEIDER switch(green color NC) | 个 piece | 1 |
8 | 施耐德急停（NO+NC双触点） SCHNEIDER emergency stop switch( NO+NC double contactor) | 个 piece | 1 |
9 | 施耐德两档转换开关 SCHNEIDER two gear switch | 个 piece | 2 |
10 | 施耐德急停按钮ZB2-BS54C(自锁) SCHNEIDER emergency switch ZB2-BS54C(auto lock) | 个 piece | 1 |
11 | 吹杯电子阀SMC SMC cup blow valve | 个 piece | 1 |
12 | 加热瓦片650W230江苏 Chinese ceramic heater 650W/230V | 个 piece | 6 |
13 | 5K单圈电位器 5K single loop potentiometer | 个 | 1 |
14 | 电柜排气扇120/120 Control panel exhaust fan 120/120 | 个 piece | 1 |
15 | 中间继电器DC24V+底座 Auxiliary relay DC24V+base | 个 piece | 4 |
16 | 开关电源NES-50-24 NO:DB35259829 Switching power supply NES-50-24 NO:DB35259829 | 个 piece | 1 |
17 | 施耐徳空气开关 20A/1P SCHNEIDER air breaker 20A/1P | 个 piece | 3 |
18 | 施耐徳空气开关 25A/1P SCHNEIDER air breaker 25A/1P | 个 piece | 3 |
19 | 施耐徳空气开关 10A/2P SCHNEIDER air breaker 10A/2P | 个 piece | 1 |
20 | 步进电机16N Stepping motor 16N | 套 set | 1 |
21 | 放大器 Amplifier | 套 set | 1 |
22 | 电子阀 Electronic valve | 个 piece | 6 |
23 | 亚德客气缸40X300 AIRTECH air cylinder 40X300 | 个 piece | 1 |
24 | 气缸25X20 Air cylinder 25X20 | 个 piece | 1 |
25 | 气缸16X10 Air cylinder 16X10 | 个 piece | 2 |
26 | 卷边主电机1.5千瓦产地东莞台历 Rim roller main motor 1.5KW TAILI brand | 个 piece | 1 |
27 | 进杯输送电机300瓦产地东莞台历 Cup insert motor 300W TAILI brand | 个 piece | 1 |
28 | 出杯输送电机90瓦产地东莞台历 Cup outlet motor 90W TAILI brand | 个 piece | 1 |
29 | 电子阀吹气SMC SMC electronic valve for air blow | 个 piece | 1 |
备注：
Remark:
根据实际生产需要，上述配置可能发生变动，但更改后的电器元件质量不低于上述表格中所列明的电器元件。
According to the actual production inquiry, the above mentioned electrical parts might be replace to other brand, but the replacement quality should be same as those listed above.
FOB China.
- Delivery time: The Seller will hand over the goods to the buyer after 40 business days, excluding Saturdays, Sundays and public holidays ( 1- 5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment, from the day confirm the sample draw(if have)
- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install
Set up :
- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.
Acceptance :
1 . Equipment that is considered valid must meet the following requirements:
2 . Specifications and functions of the machine match the content of this contract.
3 . Electrical, mechanical and control systems run smoothly.
4 . Run out sample products as required.
5 . Must have a certificate of quality of the place of production and documents attached to the machine.
ARTICLE 2 : PAYMENT METHOD
The buyer makes payment to the seller in 02 times by transfer to the seller's account.
First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.
2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer ( IF YES) . The seller will send a notice of delivery to the buyer.
ARTICLE 3 : WARRANTY
Warranty period: within 12 months from the acceptance date of the equipment.
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
点击右上角
分享给朋友吧
© 2025 GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD all rights reserved
Contact us
GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD
Telephone: 020-38912384
Email :
Sales@champion-automation.com
Fax: 020-38912463
Tel: 0086-18816899059, 15018408881
Add:Room 2116,No 101-1 ,Li Xin 12th street, Xin Tang Town, Zeng Cheng District, Guang Zhou, Guang Dong province, China
