PVC Pipe Needle Production Line(Two mould heads)

PVC Pine Needle Production Line(Two mouldheads)

OG-SJ65PVC 圆松针丝机组主要技术参数如下：

OG-SJ65PVC Circle Pine Needle Machine configurations:

一． 挤出机 Extruder:   φ65î28

1)   机型 Model                                               Φ65*28D

2)   螺杆 Screw                                                (PVC 颗粒料专用螺杆 For PVC pellets)

直  径 Diameter:                                           65mm

长径比 L/D:                                                28:1

材  质 Material：                                           38CrMoAlA

表面处理 Surface treatment:                      渗氮  镀铬  镜面抛光

Nitriding, chroming and mirror polishing

3)   机筒 Barrel

材质 material：

内表面处理 Inner surface treatment

加热控制区 Heating ：38CrMoAlA 氮化  衍磨 6 区  6zones

机筒散热区 Barrel cooling：  4   区  4zongs

冷却系统 Cooling system： 

台湾多翼式散热风机     （0. 18kw*4 台）

Taiwan Multi-fans cooling fan(0. 18kw*4sets)

风罩材质 Fan cover material：不锈钢+铸铝加热器  Stainless steel+Cast AL heater

4)   减速箱 Reduction gearbox ：         (方型硬齿面大扭矩减速传动箱

Square hard tooth surface high torque reduction transmission box

箱体材质 Gearbox material：               合金铸钢 Alloy cast steel(40CrMnMo)

齿轮形式 Gear wheel type：                  斜齿轮 Helical gear

齿轮材质 Gear wheel material：20CrMnTi(硬齿面,研磨处理 Hard surface, grinding)

轴  材  质 Axle material：                      40Cr

润滑系统 Lubrication system：             压力润滑系统 Pressure lubrication system

5)  控制系统 Controlling system

控制功率 Control Power：                      22KW

控制形式 Control way：                 （汇川变频控制 Inverter control ）

电柜形式 Electricity cabinet ：           联体式电柜一套  All in one set

电        源 Voltage：                                 三相五线*380V*50HZ*3P

二．   模具机头 Mould+Machine head

喷丝板  Extruding nozzle：                  多孔（耐热合金钢  S136）， 两套

Multi-hole , heat-resisting alloy steel S316*2SETS

三．   不锈钢冷却水箱 Stainless steel cooling water tank              1set

1)材质 Material:

2） 水箱规格 Tank specification: 3)  尼龙导轮 Nylon wheel:

304 不锈钢 Stainless steel 304

1300î800î500 mm

2pcs

四． 第一牵伸机  First draw machine                                                  一 台 1set

1） 电机功率 Motor power:        2.2kw   （采用汇川变频器 Huichuan inverter）

2） 辊筒规格 Roller size: Φ290î300mm （五只钢辊， 表面镀铬 5 steel    rollers

+chroming ）

3） 传动形式 Driving type                                 链条传动 Chain driving

4） 304 不锈钢接水盘一个    304 stainless steel water pan 1set

五． 热水箱 Hot water tank                                            一套 1set

1)加热方式 Heating way:                                     电加热 Electrical heating

2)水箱规格 Tank size                                          3000î300î 180mm

3)加热功率 Heating power                                  27kw

4)不锈钢压辊 Stainless steel    pressing roller : Φ180î280mm

5)材质 Material:                                                     不锈钢 Stainless steel

六． 第二牵伸机 The Second Draw Machine               一 台 1set

1)电机功率 Motor power：             2.2kw     （采用汇川变频器 Huichuan inveter）

2)辊筒规格 Roller size:                  Φ280î300mm （五只钢辊 5 Steel roller） 3)传动形式 Driving type                                     链条传动 Chain driving

4） 304 不锈钢接水盘一个 304 stainless steel water pan 1set

七． 隔热定型烘箱    Insulated Setting Oven               一套 1Set

1)加热方式 Heating way:                     电加热（上下加热）Electrical heating(Up+down)

2)加热功率 Heating power:                          26KW

3)前后托辊 Front+back carrier roller            2 个  2pcs

4)烘箱长度 Oven length:                              3000mm

八． 三轮牵引机  Three-wheel haul-off machine              一 台   1set

1） 电机功率 Motor power                   1.5kw    （采用汇川变频器 Huichuan inverter）

2） 辊筒规格 Roller size:                      Φ280î300mm

3） 传动形式 Driving way:                    链条传动 Chain driving

4） 304 不锈钢接水盘一个 304 stainless steel water pan 1set

九.  双工位收卷机 Two-position Winding Machine                       一 台 1set

1)  收卷直径 Winding diameter:                    1.5m （收卷盘采用不锈钢可以调整直径

Adjustable stainless steel winding plate ）

2)  力距电机 Torque motor:                               6N.m

3)力距离合控制器 Torque clutch controller        一套 1set

4） 计米报警器 Meter alarm      一套 1set

5) 304 不锈钢接水盘一个 304 stainless steel water pan 1set

十． 配件 Spare parts        一套 1set

Remarks:

1.    Frequency   inverter    is   from    Huichuan,   Jiangmen    Jiangcheng   motor,   HUB

temperature controller and relay.

2.    The screw and the barrels are both made of high quality nitrogen zed

steel-38CrMoAlA, and are nitration austerely according to national standard , nitration hardness: screw≥740HV; barrels≥940HV. Nitration depth: barrels:

0.6-0.7mm; screw: 0.4-0.6mm, fragility is 2 grades.

3.    The speed reducer box materials is made of alloy cast steel, contact surface of up,

down box is grinded precisely . The gear material is made of 40Cr, and normalizing,

quenched tempering, quenching heat treatment, the teeth deal with grinding and

peeling eventually, the teeth surface harshness is Ra 0.8, and provided with

shock-absorbing, antifriction, low-noise and other characteristic.

on your side.

FOB China.

- Delivery time: The Seller will hand over the goods to the buyer after 45 business days, excluding Saturdays, Sundays and public holidays (1-5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment

- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install

Set up :

- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.

Acceptance :

l Equipment that is considered valid must meet the following requirements:

l ü Specifications and functions of the machine match the content of this contract.

l ü Electrical, mechanical and control systems run smoothly.

l ü Run out sample products as required.

l ü Must have a certificate of quality of the place of production and documents attached to the machine.

ARTICLE 2: PAYMENT METHOD

· The buyer makes payment to the seller in 02 times by transfer to the seller's account.

· v First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.

· v 2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer (IF YES). The seller will send a notice of delivery to the buyer.

ARTICLE 3: WARRANTY

Warranty period: within 12 months from the acceptance date of the equipment.

During the warranty period, if the equipment is defective by the manufacturer of the Seller, the Seller is responsible for the presence at the purchaser factory within 48 hours of being notified to repair the equipment. All costs incurred will be borne by the Seller.

(If the device is faulty by the user or is affected by unintended issues such as

Unstable electrical lines, collisions, natural disasters, unclean hygiene, the purchaser must be fully responsible for paying for repair and other replacement expenses)

ARTICLE 4: BUYER'S LIABILITY

6.1 Provide auxiliary systems and handover surface installation equipment. The auxiliary systems include: supply of supplies and preparation of 3 Phase 220V / 50Hz power supply systems for electrical appliances including switches, sockets, power wires, Electric three-phase electric switches, electric lines, steam-lines, gas lines, gas valves, pipes, elbows,

The buyer is responsible for dropping the item at the buyer's address to the correct location

6.2 The purchaser shall be responsible for sending the representative to receive the goods and taking over the test when the equipment has been installed and the instruction manual is used.

6.3 The buyer pays the seller under Article 4 of this contract.

6.4 The expenses such as as airplane, visa, travel expenses,other expenses for foreign engineers in china will be paid by the Seller.

6.5 The Other expenses such as pick up and see off ,dining, hotel for technical will be charged by the buyer,the buyer will be pay for the engineer 150USD each day .

ARTICLE 5: SELLER'S LIABILITY

7.1 Commitment to deliver the equipment to the purchaser in accordance with the type and design of this contract.

7.2 Vendors undertake:

Asian. Ensure time and progress of equipment handover

B. Assurance of quality and content in accordance with agreement requirements.

C. Vendors nominate technical staff to assist, install and guide the buyer to operate and use the equipment well when installing the machine.