Quotation of Stacking Type CAT-105120 Fully Automatic PS Foam Food Box/Plate Production Line

Origin:

P.R. China

Package:

Export Standard Packing.

Delivery time:

Within 75 working days after receipt of the down payment.

Payment:

After signing sales contract, T/T 30% down payment in 7 working days, the balance 70% paid by T/T before shipment after test run in the seller’s factory.

Shipment:

3x40’HQ containers for shipping.

Installation:

1engineer will go to buyer’s factory for the test run of whole line and the buyer should undertake whole food/ place and round tickets (airplane and car and so on) and visa fee. The test run period should be finished in 15days. About the hotel (no requirements about star), it should be near workshop. The buyer should pay USD100.00/per day to each engineer offered by the seller during test period. About airplane, it is better Air China and economic class.

Guarantee:  

The main parts of production line are one year guarantee of quality, The electricity 

parts and easily damaged parts are 6 months guarantee of quality.

Validity:  

60 days

Power supplier:

All Motors and electric parts are at current 3 phase 4-line 380V 50HZ + Ground.

If any changes need, the buyer should take charge all the surcharges.

Foundation:

The buyer should prepare workshop, electricity, recycling water, cooling water tower, air compressor, PS raw material, foamed agent and workers for the test run of machinery before the arrival of machinery. Otherwise, the delay of test caused by the buyer will be undertaken by the buyer.

Finished products:  

Ps foam fast food box, foam tray, pizza box, egg tray, and so on. Depending on changing molds.     

Sheet thickness:

1-5mm  

Sheet width:  

600-1200mm

Capacity:   

180-240kgs/h

Operator:

6-8 workers

Water consumption:  

200kgs/24hrs

Cooling water tower:  

20 T/ h

Electricity consumption:    

3300-3800kw/24hrs

Butane gas consumption:  

55-60kgs/one-ton materials

Air compressor:

1.5 m³/min

Installation power:

430Kw

A. Mixer 

Function: It is used to mix the food grade GPPS (General Purpose Polystyrene) Granules, talc powder, HIPS, Absorbent Masterbatch and color agent etc according to the fixed ratio so that we can get the special PS roll.

Hopper Capacity

300-500kg/ hopper (controlled by time relay)

Motor

1 set, 4-pole, 3kw

B. Automatic Feeding System

Function: After mixiing all the material, it will be suck into the feeding hopper. There is a button to switch and then it will be feeded in to feeding hopper.

Automatic Self-control System

Motor

1 set, 6-pole, 1.1kw

C.  NO.1 Extruder

Function: NO.1extruder is used to heat all the mixed material to be liquid state.

Screw Diameter

Φ105mm 

L/D              

30:1

Screw Material:

38CrMoAlA adopt Nitrogenous treatment

Heating zones:

6 zones

Butane Gas Pump:

1 set

Function: After the mixed material to be liquid at NO. 1 Extruder, there is a hole at middle to be injected the Butane gas for foam.so we need this butane gas pump.

Digital Pressure Gauge:

1 pcs

Function: This Digital Pressure Gauge will show us the pressure we need. Different pressure means different volumes butane gas injected and then we can get different quality PS roll as we need.

Fully-automatic Hydraulic filter changer:

1 set

Function: For new machine, there will be dust inside the screw and if you use recycling material to produce PS roll, there will be dust too. So, we need set a filter changer to filter the impurity out. The filter screen can be changed easily by hydraulic station control. And the pressure will be showed on the screen too.  

Electrical Cabinet:

1 set

Function: There are to electric cabinet. One is control cabinet; it is controlled by frequency exchanger. The NO. 1 & NO.2 Extruder screw rotating speed and Butane Gas Injecting Speed can be adjusted at the screen. So that we can adjust the work speed and product different quality requirement. One is temperature control cabinet. All heating zones temperature will be showed on the panel and we can set the temperature we need and the real temperature also can be showed on the panel.

The button of air cooling and water cooling is also on the cabinet. By adjusting the temperature, we can get the good quality PS roll as we need.

Motor:

3 sets (4-pole, 55kw, by frequency exchanger) (4-pole, 2.2 kw, by frequency exchanger) (4-pole, 5.5kw)

D NO.2 extruder

Function: After NO.1 Extruder Heating and Filter Changer Filtering the impurities, the liquid material enters into the NO.2 Extruder.This part has the cooling pipe to cool the liquid material to be appropriate temperature and then can be ok to produce PS Roll.

Screw Diameter.

Φ120mm

L/D  

32:1

Material

38CrMoAlA adopt Nitrogenous treatment

Heating zones  

6 zones

Pressure gauge  

1pcs

Function: At the end of NO.2 Extruder, there will be a pressure gauge to show us the pressure. When the pressure is up to the value as we need, it will be extruded from the extruder die unit.

Automatic water-cooling system  

5sets

Motor    

4-pole 55kw by frequency exchanger

E. Extruder Die Unit

Function: When the temperature and pressure is appropriate for producing PS Roll, it will be extruded from this unit. There is mold inside it.

F. Cooling System

Function: After extruded the PS Roll, it is very soft as like liquid because the temperature is high and it is not a roll without shaping. So, we need cool it and shape it. This cooling and shaping drum will do this job. Inside the shaping drum, it is water and outside of the drum, it is air ring and air fan together to cool it. The shaping drum is round and it will shape the PS Round roll and cut it to be sheet by the knife at the bottom. The shaping drum diameter also decides the width of the PS sheet.

Hollowness water circulation cooling

1 set, as the dimensions by the customers

G. Hauling-off System

Function: Hauling Off System is used to hauling the cooled PS Sheet to the rubber roll to expand it flat. There is also counter to know the length so that we can know how many meters of each roll. When the length is up to the setting length, the alarm will remind. This part also has static eliminator to let erase the static.

Rubber Roller

3 pcs, (according customer’s requirement)

Traction Speed

3-31m/min

Motor

1x 4-pole, 3 kw (controlled by frequency changer)

Counter   

1pc

Alarm system

1set

Haul-off type

run in S route by self-friction

H. Winding Device

Function: Roll the PS Sheet and pack it. There are two winding rolls. When the first roll is up to the setting length, there is foot switch to stop it and start another winding roll.

Winding Pneumatic Shaft

2 pcs (according customer’s requirement)

Torque motor  

2sets

Turbine Reducer

2sets

Static Electricity Eliminator

1set

Alarm

1set

I. Installation Power  

255kw

Central height

1000mm

J.  Weight  

8 T

Automatic Control Cabinet

1 set

Function: PLC Control the total machine working and each part have button to operature. All the setting parameter will be showed on the screen panel as like our smart phone. It is easy for operating and checking each part.

Automatic Temperature Control Cabinet

1 set

Function: There are two heating zones. One is at top and one is at bottom. Then there are two temperature control cabinet which can show the top and bottom temperature of each small part. You also can set the temperature and show you the real temperature at panel. By adjusting the temperature, we can produce different quality required products.

PLC Controller

Touch Screen  

Adopt Taiwan brand

Function:  There is program at the PLC and it will be showed on the screen panel. We can set it to be different language so that different people from different country can operate it easily.

2.Automatic Feeding device

1 set Feeding length can be adjusted.

Function: There are two rolls for feeding. When the first roll is finished, the second roll can be soon prepared for feeding. There is sensor to set the feeding length.

3.Heating System

2sets

Function: There is top and bottom heating system to heat the PS roll. It can be pushed out when the power is off so that the PS Roll can not be heated too long time to get fire.

 Subsidiary Heating Zone /2 sets

Adopt the far infrared radiation tile.

4. Forming System

Adopt hydraulic cylinder drive

Function: It is controlled by hydraulic station up and down. There is up and down mold for forming. By changing different mold, we can get different type products.

Motor

2 sets 7.5kw

Hydraulic Stations

2 sets

Function: Control the up and down mold up and down to form.

Vacuum Forming Press

60T.

Forming Area

1040mm×1250mm

Vacuum Forming Speed  

3-8s/mold.

5.Cutting off System

Adopt hydraulic drive

Function: Cutting off mold is mainly used to cut the product separate with the total PS Formed Sheet.

Motors

1 set 18.5kw

Hydraulic station

1 set

Function: Control the cutting off mold up and down to let each product separate with the PS Formed Sheet.

Max. Punching

100T

Cutting off area

1040mmx1250mm

Cutting off speed

3-8 s/mould

6.Stacking System

Function: After forming and cutting the ps foam products separate with the total PS Formed Sheet, There are still some connection point to connect with the ps sheet. Then stacking mold will suck the products out and then put them on the working tables for steadily. It is easy for packing and counting.Counting can be set at PLC.

Pneumatic Control

Automatically Stack

Adjustable, as customers’ need

Automatic Counting System

Adjusted, according to the customers’ need

Automatically Conveyor

7.Scrap Rolling System

Automatically

Function: After forming, cutting off and stacking the products on the worktable, the left are waste scraps. It will be winding to be a roll by this rolling system.

8.Installation Power:

180kw

9. Power Supply 

3 phases 4-line 380V 50Hz

10.Weight:

12 T

Function: The waste scraps are big part, so we need this crusher to get very small scraps and then feed these small scraps to the recycling granulator.

Installation Power:

11 KW

Fully automatic conveying  

1 set

Size:

2mx2mx1.6m

Weight:  

0.7T

B. Granule Maker  

Function: It is used to recycle the waste scrap to be granules again for making KT Board, egg tray, egg box and fruit tray etc.

No.1 Extruder

Function: The crushed small waste scrap will be feeded into the screw for heating to be liquid state.

Screw

Φ120 x1 set

Reducer  

1 sets  

Motor  

1 set  4 pole,18.5kw

Electrical cabinet

1 set

Function: This electric cabinet control the speed of the extruder rotating and also can set the temperature of each heating zone. The real temperature will be showed on the screen panel.

5 zones (No.1 Extruder )

automatic temperature control

Filter changer  

1 set

Function: Control the manual filter changer so that we can filter the impurities of the recycling waste scraps.

Cooling Water Tank

Function: After extruded, the recycling gpps noodles are as like liquid state, so we need put them inside the water for cooling to be rigid.

Granule cutter

1 set

Function: After cooling and brushing the water out, the rigid gpps noodles will be entered into the cutter. There is round knife to cut the noodles to be granules. The speed canadjust the size of the granules. The speed faster, the granules smaller.

Speed adjustable Motor

1 set  4 pole,1.1kw

Capacity

2-2.5T/24H

Installation power

45kw  

Weight

2.5T

PLC:

MIKOM

Electromagnetic valve:

Taiwan AIRTAC

Vacuum pump:

China Famous Brand

Hydraulic pressure system:

Japan YUKEN

Temperature controller:

Japan RKC

Servo motor:   

SIEMENS

Pneumatic part:

Taiwan AIRTAC

Frequency Changer

ABB

Low voltage protector:

Germany DELIXI

Midget universal relay

OMRON

Contactor:

LS