Attachment 1: OG-HC120 series blow molding machine technical parameters and parts description

Maximum product volume ( L ) 220(according to design)

1. Extrusion system

2.

Component description: AC motor and alloy steel hardened gear box are used, which are suitable for products with high forming requirements, large extrusion volume and stable cycle, such as automobile fuel tanks, chemical barrels, etc. The length-diameter ratio of the screw is 30:1 ; Make the plasticization of the raw materials uniform, the color mixing effect is remarkable, and different screw types can be equipped depending on the raw materials. The screw and barrel are made of high-quality nitrided steel 38CrMOALA, and the surface is nitrided, which greatly improves the wear resistance and service life of the screw and barrel. The heating of the extrusion system adopts imported automatic temperature controller. The feeding section of the barrel is connected with circulating water for cooling, so that the material is not sticky at the feeding port. The extruder platform is equipped with a lifting device, which can easily adjust the height of the die head to achieve the best length of the waste edge. The injection die head is equipped with a front and rear moving oil cylinder, which is convenient to adjust the front and rear positions of the die head, and can form products whose parting surface is not in the center of the mold.

▼Screw diameter (mm): 120

▼Screw length to diameter ratio L/D: 30:1

▼Screw speed ( rev. / min. ): 5~55

▼Plasticizing capacity ( kg / h ): 350-400

▼The number of barrel heating sections: 5

▼Barrel heating power ( KW ): 37

▼Extrusion motor power ( KW ): 110

3. Die head

4.

Component description: The overall structure is treated with special electroplating and polishing. The design of the flow channel follows the principle of first-in-first-out. The die head can be controlled by B&R 100 point wall thickness system imported from Europe and Austria to precisely control the thickness of the product. The heating method adopts stainless steel heating ring, and the temperature control adopts automatic temperature controller. The temperature control accuracy can be controlled within ±1℃. The main parts of the die are made of high-quality nitrided steel 38CrMOALA, and the surface is nitrided. Make sure that the runner part is smooth and the hardness of the surface is guaranteed.

▼Maximum storage volume ( L ): 20

▼Maximum shot speed ( kg / sec. ): 1.5

▼Maximum die diameter ( mm ): 450

▼Number of die heating sections: 4

▼Die head heating power ( KW ): 50

3. Clamping device

4.

Component description: The mold opening and closing system adopts a linear guide, double tie rod, hydraulic bidirectional synchronous fixed mold opening and closing mechanism, which is convenient for product removal and mold replacement. It is suitable for the production of large-scale products.

▼Mold platen effective size(WxH) (mm): 1300 x 1400

▼Mold platen stroke ( mm ): 700~1800

▼Clamping force ( KN ): 750

5. Pickup robot (optional)

6.

Component description: The transmission rate is stable and reliable with the use of Airtac cylinders; the front and rear of the manipulator are equipped with buffer devices, which have little impact; the perfect cooling system ensures that the product falls off smoothly.

▼Pickup stroke ( mm ): 1600

5. Frame

▼ Lifting stroke ( mm ): 450

▼ Lifting speed ( mm / min. ): 30

7. Hydraulic system

8.

Component description: The HC large machine series adopts the Italian Physis servo hydraulic system, and the oil pump adopts the original Japanese Sumitomo gear pump. The imported Japanese Yuken brand is adopted to make the system control precise and the movement smooth. The oil pipe adopts crimp joints and European imported oil pipes to ensure the reliability of the entire oil circuit system.

▼Pump rated flow ( L / min. )： 190

▼Pump rated pressure ( MPA. ): 14

▼Hydraulic pump motor power ( KW ): 22+15 or 37

▼Wall thickness control hydraulic servo system (option)

▼Rated pressure (MPa): 14

▼Rated flow ( L / min. ): 23

▼Hydraulic pump motor power ( KW ): 11

7. Pneumatic system

Component description: The HC big machine series pneumatic system provides air power and control for the product inflation molding and the manipulator. Pneumatic components are concentrated on the control panel for easy operation and maintenance. The main pneumatic components use AIRTAC or FESTO (Germany Festo) company products, with reliable quality and stable performance.

▼Air supply pressure (MPa): 1

▼Working pressure (MPa): 0.8

▼Air consumption ( M3 / min. ): 2

9. Electrical control system

10.

Component description: HC large machine series is a computer-optimized design, automatic, high-speed, machine, electricity and hydraulic integration of medium and large blow molding equipment. It has the characteristics of convenient operation, simple and easy-to-learn process parameter setting, fault alarm display and so on. The electrical appliances are controlled by European B&R, which can meet the blowing of various products. Contactors, relays, etc. all use world famous brand products, so that the machine has a high-quality guarantee.

9. Water source

▼Water supply pressure (MPa): 0.3

10. Power

▼Voltage: AC380V±10%

▼Frequency: 50HZ

▼Wire system: Three-phase four-wire system + neutral line

11. Installed capacity

▼Total rated power ( KW ): 267

▼Average energy consumption ( KW h ): 120

▼Dimensions (mm): 6700x3900x5650

▼Machine weight ( ton. ): 25

MACHIEN PICTURE

Attachment 2: Configuration

The above is the current configuration and is subject to change without notice

FOB China.

- Delivery time: The Seller will hand over the goods to the buyer after 120 business days, excluding Saturdays, Sundays and public holidays (1-5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment

- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install

Set up :

- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.

Acceptance :

l Equipment that is considered valid must meet the following requirements:

l  Specifications and functions of the machine match the content of this contract.

l  Electrical, mechanical and control systems run smoothly.

l  Run out sample products as required.

l  Must have a certificate of quality of the place of production and documents attached to the machine.

ARTICLE 2: PAYMENT METHOD

v The buyer makes payment to the seller in 02 times by transfer to the seller's account.

v  First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.

v  2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer (IF YES). The seller will send a notice of delivery to the buyer.

ARTICLE 3: WARRANTY

Warranty period: within 12 months from the acceptance date of the equipment.

During the warranty period, if the equipment is defective by the manufacturer of the Seller, the Seller is responsible for the presence at the purchaser factory within 48 hours of being notified to repair the equipment. All costs incurred will be borne by the Seller.

(If the device is faulty by the user or is affected by unintended issues such as

Unstable electrical lines, collisions, natural disasters, unclean hygiene, the purchaser must be fully responsible for paying for repair and other replacement expenses)

ARTICLE 4: BUYER'S LIABILITY

6.1 Provide auxiliary systems and handover surface installation equipment. The auxiliary systems include: supply of supplies and preparation of 3 Phase 220V / 50Hz power supply systems for electrical appliances including switches, sockets, power wires, Electric three-phase electric switches, electric lines, steam-lines, gas lines, gas valves, pipes, elbows,

The buyer is responsible for dropping the item at the buyer's address to the correct location

6.2 The purchaser shall be responsible for sending the representative to receive the goods and taking over the test when the equipment has been installed and the instruction manual is used.

6.3 The buyer pays the seller under Article 4 of this contract.

6.4 The expenses such as as airplane, visa, travel expenses,other expenses for foreign engineers in china will be paid by the Seller.

6.5 The Other expenses such as pick up and see off ,dining, hotel for technical will be charged by the buyer,the buyer will be pay for the engineer 200USD each day .

ARTICLE 5: SELLER'S LIABILITY

7.1 Commitment to deliver the equipment to the purchaser in accordance with the type and design of this contract.

7.2 Vendors undertake:

Asian. Ensure time and progress of equipment handover

B. Assurance of quality and content in accordance with agreement requirements.

C. Vendors nominate technical staff to assist, install and guide the buyer to operate and use the equipment well when installing the machine.